Unless the context specifically indicates otherwise, the meaning of terms in these rules and regulations shall be as follows:
ABNORMAL STRENGTH SEWAGE
Any waste having a suspended solid, BOD, chlorine demand or total phosphate concentration in excess of that found in normal strength sewage, but which is otherwise acceptable into a public sewer under the terms of these regulations.
APPROVAL AUTHORITY
The director in a SPDES state with an approved state pretreatment program and the Administrator of the EPA in a non-SPDES state without an approved state pretreatment program.
ASTM
The American Society for Testing and Materials.
AUTHORIZED REPRESENTATIVE OF INDUSTRIAL USER
A. 
A principal executive officer of at least the level of vice president, if the industrial user is a corporation;
B. 
A general partner or proprietor if the industrial user is a partnership or proprietorship, respectively;
C. 
A duly authorized representative responsible for the overall operation of the facilities from which the indirect discharge originates.
BOD (denoting BIOCHEMICAL OXYGEN DEMAND)
The quantity of oxygen utilized in the biochemical oxidation of organic matter under standard laboratory procedure in five days at 20° C. 68° F. expressed in milligrams per liter (mg/l). Measurement shall be as set forth in the latest edition of "Standard Methods for the Examination of Water and Waste Water."
BUILDING CONNECTION LATERAL
The pipe laid incidental to the original construction of a public sewer from the public sewer up to some point at the side of the street, highway or similar location, and there capped, having been provided and intended for extension and for use at some time thereafter as part of a building or house sewer connection.
BUILDING DRAIN
That part of the horizontal piping of a building drainage system which receives the discharge of all soil, waste and other drainage from inside the walls of any building and conveys the same to the building service sewer five feet outside the foundation wall of each building.
BUILDING SERVICE SEWER
That part of the horizontal piping of a building drainage system beginning five feet from the foundation wall and terminating at its connection with the main sewer, cesspool, septic tank or other disposal terminal.
°C
Degree Centigrade.
CATEGORICAL STANDARDS
The National Categorical Pretreatment Standards or Pretreatment Standards.
COMBINED SEWER
A sewer designed to receive and transport both surface runoff and sewage.
COMMERCIAL USER
Includes any property occupied by a nonresidential establishment not within the definition of "industrial user" and which is connected to the publicly owned treatment works (POTW).
COMPOSITE SAMPLE
A sample consisting of several effluent portions collected during a specific time period and combined to make a representative sample.
COMPOSITE SEWAGE
Sewage consisting of several effluent portions collected from various discharge lines at a common point.
COOLING WATER
The water discharged from any system or condensation, air conditioning, cooling refrigeration or other sources. It shall contain no polluting substances which would produce BOD, or suspended soils, in excess of 10 parts per million by weight, or toxic substances as limited elsewhere herein.
COUNTY
The County of Washington.
DEPARTMENT OF ENVIRONMENTAL CONSERVATION
The New York State Department of Environmental Conservation.
DIRECT DISCHARGE
Discharge of treated or untreated wastewater directly to the waters of the State of New York.
DIRECTOR
The Director, duly appointed by the Town Board of the Town of Kingsbury, shall be the Town Board's authorized agent in matters falling under these rules and regulations issued pursuant hereto and shall exercise the powers stipulated in these rules and regulations and which are subject to the approval and ratification of the Town Board. The Director shall report to the Town Board upon applications for sewer connections, shall inspect the construction of such sewer connections and shall report to the Town Board upon any transgression of these rules and regulations issued pursuant hereto.
DISTRICT
Kingsbury Sewer District No. 1.
DISTRICT SEWERAGE SYSTEM
The interceptor sewers, trunk sewers, collector sewers, force mains, pumping station, sewage treatment plants and other appurtenant structures owned and operated by the Kingsbury Sewer District No. 1.
DOMESTIC SANITARY SEWAGE
The solid and liquid wastes from toilet and lavatory fixtures, kitchens, laundries, bathtubs, shower baths, or equivalent plumbing fixtures as discharged from dwellings, business and industrial buildings.
EFFLUENT
Wastewater, after some degree of treatment, flowing out of any treatment device or facilities.
EPA
The United States Environmental Protection Agency.
EXCESSIVE INFILTRATION/INFLOW
The quantities of infiltration/inflow which can be economically eliminated from a sewer system by rehabilitation, as determined by a cost-effectiveness analysis that compares the costs for correcting the infiltration/inflow conditions with the total costs for transportation and treatment of infiltration/inflow.
°F
Degree Fahrenheit.
FLOW RATE
The quantity of waste or liquid that flows in a certain period of time.
FLOW VOLUME
The quantity of waste or liquid.
GARBAGE
Solid wastes from the domestic and commercial preparation, cooking and dispensing of food, and from the handling and storage and sale of produce.
GRAB SAMPLE
A sample which is taken from a waste stream on a one-time basis with no regard to the flow in the waste stream and without consideration of time.
HOLDING TANK WASTE
Any waste of domestic origin from holding tanks such as chemical toilets, campers, trailers, human excrement and garbage (scavenger waste). Also included is sewage sludge from small sewage treatment plants.
INDIRECT DISCHARGE
The discharge or the introduction of nondomestic pollutants from any source regulated under Section 307(b) or (c) of the Act (33 U.S.C. § 1317), into the POTW (including holding tank waste discharge into the system).
INDUSTRIAL USER
Any industrial or commercial establishment with a classification as designated in the Standard Industrial Classification Manual, 1972 edition, as published by the Executive Office of the President and which utilized the services of the District.
INDUSTRIAL WASTEWATER
Includes the water-carried wastes from any industrial manufacturing processes, trade or business as distinct from sanitary sewage.
INDUSTRIAL WASTEWATER PERMIT
A permit to deposit or discharge industrial wastewater into any sanitary sewer under jurisdiction of the District.
INFILTRATION
Water entering a sewer system, including sewer service connections from the ground, through such means as, but not limited to, defective pipes, pipe joints, connections or manhole walls. Infiltration does not include, and is distinguished from, inflow.
INFLOW
The water discharged into a sewer system, including service connection from such sources, but not limited to, roof leaders, cellar, yard, and area drains, foundation drains, cooling water discharge, drains from springs and swampy areas, manhole covers, cross connections from storm sewers and combined sewers, catch basins, stormwaters, surface runoff, street wash waters or drainage. Inflow does not include, and is distinguished from, infiltration.
INTERFERENCE
The inhibition or disruption of the POTW, its treatment processes or operations, or its sludge processes, use of disposal which is a cause of or significantly contributes to either a violation of any requirement of the District's SPDES permit. The term includes prevention of sewage sludge use or disposal by the POTW in accordance with Section 405 of the Act (33 U.S.C. § 1345) or any criteria, guidelines or regulations developed pursuant to the Solid Waste Disposal Act (SWDA), or more stringent state criteria (including those contained in any New York State sludge management plan prepared pursuant to Title IV of SWDA applicable to the method of disposal or use employed by POTW).
mg/l (MILLIGRAM PER LITER)
The number of milligrams of dry solids, either dissolved or undissolved, contained in one liter of water, including solids. One milligram per liter may be expressed as 8.345 pounds of dry solids per 1,000,000 United States' gallons of water, including solids. Milligrams per liter may be expressed as parts per million, designated as "ppm," meaning the number of pounds of dry solids contained in 1,000,000 pounds of water, including dry solids, by using the following formula:
mg/l = ppm-specific gravity of the solution
NATIONAL CATEGORICAL PRETREATMENT STANDARD or PRETREATMENT STANDARD
Any regulation containing pollutant discharge limits promulgated by the EPA in accordance with Section 307(b) or (c) of the Act (33 U.S.C. § 1347), which applies to a specific category of industrial user.
NATURAL OUTLET
Any outlet into a watercourse, pond, ditch, lake or other body of surface or groundwater.
NEW SOURCE
Any building, structure, facility or installation from which there is or may be a discharge of pollutants, the construction of which commenced after the publication of proposed pretreatment standards under Section 307(b) of the Act, which will be applicable to such source if such standards are thereafter promulgated in accordance with that section.
NORMAL SEWAGE
Sewage, industrial wastewater or other wastes, which when analyzed show by weight the following characteristics:
A. 
BOD: 2,000 pounds per million gallons (240 milligrams per liter) or less;
B. 
Chlorine demand: 208 pounds per million gallons (25 milligrams per liter) or less; and
C. 
Suspended solids: 2,500 pounds per million gallons (300 milligrams per liter) or less.
OBJECTIONABLE WASTE
Any wastes that can harm either the sewers, sewer treatment process, or equipment, have an adverse effect on the receiving stream, or otherwise endanger life, health or property or constitute a nuisance.
OTHER WASTES
Garbage (shredded or unshredded), refuse, wood, egg shells, coffee grounds, sawdust, shavings, bark, sand, lime, cinder, ashes and all other discarded matter not normally present in sewage or industrial wastewater.
PERSON
Any individual, firm, company, association, society, corporation, or group contributing directly or indirectly to the District sewage system.
pH
The negative logarithm of the hydrogen ion concentration in moles per liter. It indicates the intensity of acidity and alkalinity of the pH scale running from 0.0 to 14.0. A pH value of 7.0, the midpoint of the scale, represents neutrality. Values below 7.0 represent acidic conditions.
POLLUTED WATER OR WASTE
Any water, liquid or gaseous waste containing any of the following: soluble or unsoluble substances of organic or inorganic nature which may deplete the dissolved oxygen content of the receiving stream; settleable solids that may form sludge deposits; grease and oils, floating solids which may cause unsightly appearance; color; phenols and other substances to an extent which would impart any taste or odor to the receiving stream; and toxic or poisonous substances in suspension, colloidal state, solution or gases.
POTW TREATMENT PLANT
That portion of the District's system which is designated to provide treatment (including recycling and reclamation) to wastes received by the District's system.
ppm
Parts per million.
PRETREATMENT
The reduction of the amount of, or alteration of, pollutant properties in wastewater prior to, or in lieu of, discharging or otherwise introducing such pollutants into a POTW. The reduction or alteration can be obtained by physical, chemical or biological processes, production process changes or by other means, except as prohibited by General Pretreatment Regulations for Existing and New Sources of Pollution (40 CFR 403.6).
PROPERLY SHREDDED GARBAGE
Garbage that has been shredded to such a degree that all particles will be carried freely under the flow conditions normally prevailing in the public sewer to which it is discharged, with no particle having a dimension greater than 1/2 inch in any dimension.
PUBLICLY OWNED TREATMENT WORKS (POTW)
A treatment works as defined by Section 212 of the Act (33 U.S.C. § 1292), which is owned in this instance by the Town. This definition includes any sewers that convey wastewater to the POTW treatment plant, but does not include pipes, sewers or other conveyances not connected to a facility providing treatment. For the purposes of these rules and regulations, "POTW" shall also include any sewers that convey wastewaters to the POTW from persons outside the District who are, by contract or agreement with the District, users of the District's POTW.
PUBLIC SEWER
A trunk, main or lateral sewer up to and including the "Y" branch or tee provided for connection thereto and to which all owners of abutting properties have equal rights, and which is controlled by a public body. The public sewer does not include the building or the house sewer, or the building connection lateral after it is connected with a building sewer.
RECEIVING WATERS
A natural watercourse or body of water into which treated or untreated sewage is discharged.
RESIDENTIAL USER
Any user not covered under the definition of "Industrial User" or "Commercial User."
SANITARY SEWAGE
Sewage discharging from the sanitary conveniences of dwellings (including apartment houses and hotels), office buildings, factories or institutions, and free from stormwater, surface water, industrial wastewater and other wastes.
SANITARY SEWER
A sewer which carries sewage and to which stormwaters, surface waters, and groundwaters are not intentionally admitted.
SCAVENGER WASTES
The matter collected from privies, septic tanks, cesspools and chemical toilets and sludge from small sewage treatment plants (25,000 gallons per day or less).
SEWAGE
A combination of the water-carried wastes from residences, business buildings, institutions and industrial establishments, together with such groundwater, surface water and stormwater as may be inadvertently present. The admixture of sewage, as above defined, with industrial wastewater or other wastes also shall be considered sewage within the meaning of this definition.
SEWER
A pipe or conduit for carrying sewage.
SHALL
Is mandatory; "may" is permissive.
SIGNIFICANT INDUSTRIAL USER (SIU)
Any industrial user of the District's POTW who:
A. 
Is subject to promulgated categorical pretreatment standards;
B. 
Has substantial impact, either singly or in combination with other contributing industries, on the operation of the treatment works;
C. 
Uses, on an annual basis, more than 10,000 pounds or 1,000 gallons of raw material containing priority pollutants/substances of concern and discharges a measurable amount of these pollutants to the sewer system from the process using these pollutants; or
D. 
Discharges more than 5% of the flow or load carried by the treatment plant receiving the waste.
SLUG
Any discharge of water, sewage or industrial wastewater which in concentration of any given constituent or in quantity of flow exceeds for any period of duration longer than 15 minutes more than five times the average twenty-four-hour concentration or flow during normal operation.
SPDES
The State Pollution Discharge Elimination System.
STANDARD INDUSTRIAL CLASSIFICATION (SIC)
A classification pursuant to the Standard Industrial Classification Manual issued by the Executive Office of the President, Office of Management and Budget, 1972, or its most recent edition.
STANDARD METHODS
"Standard Methods for the Examination of Water and Wastewater" prepared and published jointly by the American Public Health Association, American Waterworks Association and the Water Pollution Control Federation, latest edition.
STORM SEWER
A sewer which carries storm surface waters and drainage, but excludes sewage and industrial wastewater other than cooling waters and other unpolluted waters.
STORMWATER
Includes the runoff or discharge of rain and melted snow or other water from roofs, surfaces of public or private lands, or elsewhere. Stormwater also shall include subsoil drainage as defined in this section.
SUBSOIL DRAINAGE
Includes water from the soil percolating into subsoil drains and through foundation walls, basement floors or underground pipes.
SURFACE WATER
The source of water which occurs when the rate of precipitation exceeds the rate at which water may infiltrate into the soil.
SUSPENDED SOLIDS
Solids that either float on the surface of, or are in suspension in, water, sewage, or other liquids, and which are removable by flotation, skimming and sedimentation. Measurement shall be set forth in the latest edition of Standard Methods.
THE ACT
Public Law 92-500, as amended.
TOWN
The Town of Kingsbury.
TOWN BOARD
The Kingsbury Town Board as the administrative body of the Kingsbury Sewer District No. 1.
TOWN SEWER DISTRICT
Any Town sanitary sewer district as created, altered or modified by action of the Kingsbury Town Board.
TOXIC POLLUTANT
Any pollutant or combination of pollutants listed as toxic in regulations promulgated by the Administrator of the Environmental Protection Agency under the provisions of Federal Water Pollution Control Act Amendments of 1972, Section 307(a) or other acts.
USER
Any person who contributes, causes or permits the contribution of wastewater into district POTW.
WASTEWATER
The liquid and water-carried industrial or domestic wastes from dwellings, commercial buildings, industrial facilities, and institutions, together with any groundwater, surface water, and stormwater that may be present, whether treated or untreated, which is contributed into or permitted to enter the POTW.
WATERCOURSE
A channel in which a flow of water occurs, either continuously or intermittently.