[Ord. 311, 8/20/2012, § I]
[Ord. 311, 8/20/2012, § I]
(a)
Street signs (D3-1) shall be mounted on ten-foot-long, two-and-one-half-inch-diameter,
round, galvanized steel posts with v-lock anchors.
(b)
All other traffic signs shall be mounted on standard breakaway green-painted
steel u-channel posts, two pounds, per foot, in sufficient length
to provide secure mounting in the ground and seven feet of clearance
between the bottom of the sign and the ground or sidewalk six feet
of clearance if there are two signs on a post).
[Ord. 311, 8/20/2012, § I]
(a)
Stop signs shall be located at the point of curvature of the right-hand,
near-side radius.
(b)
Street signs shall be located as close as possible to the center
of the radius opposite that of the stop sign.
(c)
Other signs shall be located per PennDOT codes and regulations.
(d)
All signs shall have one foot of lateral clearance between the face
of the curb or edge of cartway and the closest sign edge.
