No building sewer shall be constructed or installed without
a permit issued by the Village. The owner or his or her agent shall
make application for a permit on a form provided by the Village. The
permit application shall be supplemented by plans, specifications
and other information deemed necessary by the Village.
There shall be two classes of building sewer permits:
A permit and inspection fee as established by the Village shall
be paid at the time of submitting an application for a building sewer
permit.
The applicant for a building sewer permit shall notify the Village
when the building sewer is ready for connection to the sanitary sewer.
The connection shall be made under the supervision of the Village.
The owner shall indemnify the Village from any loss or damage
to Village improvements that may be directly or indirectly occasioned
by the installation of the building sewer and its connection to a
sanitary sewer.
All costs and expenses incident to the construction and installation
of a building sewer shall be borne by the owner.
The size, slope, alignment and materials of construction of
the building sewer and the methods to be used in excavating, placing
of the pipe, jointing, testing and backfilling shall conform to the
requirements of Chapter SPS 383, Wis. Adm. Code.
Whenever possible, the building sewer shall be brought to the
building at an elevation below the basement floor. In buildings where
the building drain is too low to permit gravity flow to the sanitary
sewer, sewage carried by the building drain shall be lifted and discharged
to the building sewer by facilities and means in conformance with
Chapter SPS 383, Wis. Adm. Code.
All excavations for a building sewer shall be adequately guarded
with barricades and lights so as to minimize hazards to the public.
Streets, sidewalks, parkways and other public property disturbed in
connection with the installation of a building sewer shall be restored.
