[Added 2-4-2015 by L.L.
No. 1-2015]
In accordance with the Regional Comprehensive Plan and the work
of the Multiple Dwelling Code Committee (MDCC), the Clinton Multiple
Dwelling Overlay (CMDO) is established to allow for restricted types
of multiple dwellings in the Clinton Street area as defined below.
This area is located off of the Transit Road corridor and adjoining
the Town of Lancaster. This provides an opportunity to provide multiple-dwelling
housing to commuters and to residents of the Town in a manner that
meets the rural aesthetics of Elma.
The boundaries of the Clinton Multiple Dwelling Overlay are
in general as follows (see Town Zoning Map for specific location):
|
All parcels north of Clinton Street to the Lancaster Town boundary,
extending east from the right-a-way off Transit Road (excluding parcels
fronting Transit Road), to approximately 300 feet west of Homeward
Road where it intersects with Clinton Road (excludes all parcels fronting
Homeward road and the two parcels fronting Clinton to the east of
Homeward).
|
The standards of the Clinton Multiple Dwelling Overlay shall be superimposed over, and supplement, the underlying zoning standards. Each multiple dwelling use must conform to the applicable design standards of the underlying zoning district, as well as the standards of this overlay district and Article XVI (Multiple Dwellings), and, if there is a conflict, the more stringent standards shall apply.
The standards contained herein, which govern multiple-dwelling
development and redevelopment within the boundaries of the Clinton
Multiple Dwelling Overlay (CMDO), are founded upon the following objectives:
A.
Establish standards to ensure that new multiple-dwelling development
or redevelopment is in character in terms of scale, design, and layout
with the rural character envisioned for this area of the Town.
B.
Reduce signage clutter by controlling the number and size of signs,
the placement of signs, and the appearance of signage.
C.
Landscaping and other amenities should be incorporated into site
development to enhance the site and screen parking areas.
D.
Design should take into consideration the objectives of this rural
agrarian area. Incorporation of elements such as community gardens,
picket fences, and other rural atmosphere amenities is strongly encouraged.
The uses that are permitted within the Clinton Multiple Dwelling
Overlay (CMDO) shall be determined by the underlying zoning district
and supplemented as follows:
(Refer to Article XVI for process and other requirements for multiple dwellings).
A.
The applicant shall meet all submission requirements of site plan
review.
B.
The applicant shall submit building plans and elevations indicating
the facade treatments and construction materials and colors of all
structures in compliance with the standards of the underlying zoning
district and the CMDO.
C.
The applicant shall submit a minimum of two different renderings
of the proposed structure(s) to be developed on the site to allow
the Planning Board to choose the alternative or recommend other alternatives
that they feel will best comply with the overlay.
D.
The applicant shall submit a site plan that identifies all components
of the development and indicates compliance with all the requirements
of the Zoning Law and this overlay.
E.
The applicant shall submit a landscape plan identifying the location,
type, size, and planting specifications of all landscaping proposed
for the site. The landscape plan shall also identify, in general,
existing vegetation on the site.
F.
The applicant shall submit a signage plan that shows the size, type,
color, placement, lighting, design, and construction materials of
each sign. Each proposed sign for the site must comply with all the
requirements of the Zoning Law and this overlay.
All multiple dwelling developments within the Clinton Multiple
Dwelling Overlay shall conform to the following requirements and standards:
A.
Minimum lot size: five acres (with a minimum frontage of 100 feet
and a minimum depth of 300 feet).
B.
Density: eight units/acre.
C.
Height: 2.5 stories or a maximum of 32 feet.
D.
Maximum lot coverage. The maximum coverage of the proposed buildings,
accessory buildings, driveways, parking areas, and other impervious
surfaces is limited to 50% of the entire lot.
E.
Building setbacks. The following setbacks shall supersede the setbacks
of the underlying zoning and apply to all multiple-dwelling developments
within the CMDO to promote the rural atmosphere. Where a setback is
not established, the underlying setback shall be applied.
(1)
Front building setbacks shall be no less than 50 feet and no
more than 100 feet as measured from the street right-of-way. Awnings,
balconies, porches, and other architectural amenities shall be permitted
to encroach upon the front setback by a maximum of five feet.
F.
Architecture. The architecture and design of any structure within
the CMDO shall comply with the standards of the underlying zoning
and shall conform to the following general guidelines:
(1)
General design. The architecture and design of any multiple
dwelling structure shall:
(a)
Enhance the visual quality of the area;
(b)
Be harmonious with adjacent uses;
(c)
All multiple-dwelling structures should avoid windows and entranceways
that have materials and designs that would make the development appear
too commercial; instead include such visual design as peaked roofs,
etc.
(d)
Comply with any additional Town Design Guidelines, where applicable.
(2)
Building materials.
(a)
Any side of a building that faces a street or public right-of-way
shall incorporate a facade constructed of any of the following materials:
stone, brick, masonry, marble, wood or vinyl siding, or other material
approved by the Planning Board.
(b)
The use of cast concrete, cinder blocks, or metal paneling shall
not be used on sides of a building that faces a street or public right-of-way.
G.
Site layout. The site layout for a multiple dwelling within the CMDO
shall comply with the general standards of the underlying zoning and
conform to the following overlay guidelines. In the case of conflicting
standards, the regulations of the overlay district shall prevail.
(1)
All new multiple-dwelling developments within the CMDO shall
not have parking lots in front of the building. Buildings should face
the road and be open and inviting to pedestrian traffic.
H.
Parking and loading areas. Off-street parking shall comply with the standards of the underlying zoning and Article IV of the Zoning Code, and shall conform to the following additional standards:
(1)
Parking and loading areas must be set back from the street right-of-way
a minimum of 75 feet.
(2)
A minimum of 10% of the interior of a parking area shall be
devoted to landscaping used to break up the parking stalls where the
parking area is visible from the public right-of-way.
(3)
Parking areas shall not contain a continuous single row of parking
stalls of greater than five parking spaces without interruption by
a landscaped island where the parking area is visible from the public
right-of-way.
(4)
In addition to the screening of a parking area required in § 144-44E(3), the use of decorative ornamental features, masonry walls, fencing, or a mix of each is encouraged to additionally screen parking and loading areas and to create a more visually appealing streetscape.
I.
Landscaping/screening. Landscaping and screening shall comply with
the standards of the underlying zoning and shall conform to the following
additional standards:
(1)
For every 25 feet of road frontage, a street tree shall be planted
in conformance with county and Town standards, where applicable.
(2)
Additional shade trees shall be planted throughout the site
at a ratio of one tree per 2,000 square feet of lot area.
(3)
The required front yard shall consist of vegetative ground cover,
perennial and annual landscaped areas, and/or other amenities that
enhance the visual appearance of the streetscape.
(4)
All landscaped areas shall be maintained and any vegetation
that dies shall be replaced during the following planting season (see
applicable Town requirements for replacement requirements: two-year
warranty).
(5)
The site should include an area set aside as a community gardens
area to be utilized by the residents of the facility. This will be
designed to enhance the site and be part of the rural/agricultural
nature of the area.
J.
Signage. Signage shall comply with the standards of the underlying zoning and § 144-102.1, Signs, and shall conform to the following additional standards:
(1)
Proposed signage shall be designed to complement the architecture
of the building.
(2)
Each building shall be permitted one sign.
(3)
Freestanding signs cannot be pole mounted. All signage shall
be ground signs with landscaping.
(4)
The use of digital signage or flashing signs is not permitted.
(5)
Overall signage may not be lit from internal lights, only the
use of individually internally lit characters on a sign, back-lit
signage, or directional lighting shall be used to light signage. The
use of flashing or neon lights is not permitted.
(6)
The appearance and placement of signage shall be subject to
Planning Board discretion as part of the site plan review process.
K.
Other.
(1)
The use of decorative lighting structures is encouraged to comply
with the character envisioned for this area.
(2)
The maximum height of any lighting structures shall be 16 feet.
(3)
Fencing placed in the front yard shall be no higher than three
feet and shall consist of wood or faux wood picket or ornamental iron
construction. A mix of stone, brick, or other masonry wall and fencing
may be permitted. The use of stockade, metal, woven wire, or barb
wire fences is not permitted in the front yard.
