A.
Purpose of district. The purpose of the R-1 Single-Family Residential
District is to accommodate single-family dwellings at low density
in areas having the established character of low-density residential
neighborhoods.
B.
Uses permitted by right, conditional use and special exception. See
Table of Uses.[1]
[1]
Editor's Note: The Table of Uses is attached to this chapter.
C.
General provisions.
(1)
All uses permitted within this district shall also comply with the applicable general provisions of this chapter set forth in Article III.
(2)
Any territory annexed by the Borough or gained through discovery
or correction of a mapping error shall automatically be zoned R-1
Single Family Residential until such time as the Borough Council by
affirmative legislative action designates otherwise.
A.
Purpose of district. The purpose of the R-2 Medium Density Residential
District is to accommodate single- and two-family dwellings, including
student dwellings, at moderate densities in areas with sufficient
infrastructure to support such densities.
B.
Uses permitted by right, conditional use and special exception. See
Table of Uses.[1]
[1]
Editor's Note: The Table of Uses is attached to this chapter.
A.
Purpose of district. The purpose of the R-3 High Density Residential
District is to accommodate single-family, two-family and multifamily
dwellings, including student dwellings, at higher densities with infrastructure
sufficient to support such density.
B.
Uses permitted by right, conditional use and special exception. See
Table of Uses.[1]
[1]
Editor's Note: The Table of Uses is attached to this chapter.
A.
Purpose of district. The purpose of the M-U Mixed Use District is
to accommodate single-family and two-family dwellings and compatible
retail and service uses in areas with infrastructure sufficient to
support such uses.
B.
Uses permitted by right, conditional use and special exception. See
Table of Uses.[1]
[1]
Editor's Note: The Table of Uses is attached to this chapter.
A.
Purpose of district. The purpose of the C-1 Commercial District is
to accommodate pedestrian-oriented retail and service uses in the
established business center of the Borough where sufficient infrastructure
exists to support such use, including off-site parking.
B.
Uses permitted by right, conditional use and special exception. See
Table of Uses.[1]
[1]
Editor's Note: The Table of Uses is attached to this chapter.
A.
Purpose of district. The purpose of the C-2 Commercial District is
to accommodate retail and service uses where sufficient infrastructure
exists and which is suitable for both pedestrian and vehicular traffic.
B.
Uses permitted by right, conditional use and special exception. See
Table of Uses.[1]
[1]
Editor's Note: The Table of Uses is attached to this chapter.
A.
Purpose of district. The purpose of the CI Commercial and Industrial
District is to accommodate intensive commercial and industrial uses
in locations that historically accommodated such uses and where such
uses are not in conflict with established or developing residential
neighborhoods, and in areas with sufficient land mass and supporting
infrastructure.
B.
Uses permitted by right, conditional use and special exception. See
Table of Uses.[1]
[1]
Editor's Note: The Table of Uses is attached to this chapter.
A.
Purpose of district. The purpose of the E Educational District is
to accommodate educational uses in areas presently occupied by educational
institutions and in which they can continue to flourish.
B.
Uses permitted by right, conditional use and special exception. See
Table of Uses.[1]
[1]
Editor's Note: The Table of Uses is attached to this chapter.
