Exciting enhancements are coming soon to eCode360! Learn more 🡪
Union City, NJ
Hudson County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
Table of Contents
Table of Contents
Code
New Laws (164) Index Notes (1)
Public Documents
Agendas (35)
[Adopted by Ord. No. 4963 (§ 13-17 of the 1996 Revised General Ordinances)]
As used in this article, the following terms shall have the meanings indicated:
SECURITY GATE
Any sliding or rolling horizontal or vertical gate in front of any structure to prevent unauthorized entrance.
No security gate shall be installed without prior approval as to design by the Construction Code Official.
A permit shall be issued by the Construction Code Official upon approval of the design prior to installation of any security gate. A fee as set forth in Chapter 155, Fees, § 155-12, for the permit shall be paid upon the issuance of the permit for administration costs.
Security gates shall be constructed of metal and so finished so as not to rust or stain either the building or the sidewalks.
[Amended 5-21-2013]
Security gates shall be of an open grill design, except that a solid panel shall be allowed from the bottom of the security gate up to a maximum of 36 inches from the sidewalk.
Any person who violates any provision of this article, upon conviction thereof, shall be subject to a fine not exceeding $500 or by imprisonment not exceeding 90 days, or both. A separate offense shall be deemed committed on each day during or on which a violation occurs or continues.