Exciting enhancements are coming soon to eCode360! Learn more 🡪
Township of Parsippany-Troy Hills, NJ
Morris County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
Table of Contents
Table of Contents
[HISTORY: Adopted by the Township Council of the Township of Parsippany-Troy Hills 12-20-2005 by Ord. No. 2005:32. Amendments noted where applicable.]
GENERAL REFERENCES
Individual sewage disposal systems — See Ch. 326.
Sewers — See Ch. 329.
Streets and sidewalks — See Ch. 360.
Water — See Ch. 420.
The purpose of this chapter is to prohibit the spilling, dumping or disposal of materials other than stormwater to the municipal separate storm sewer system (MS4) operated by the Township of Parsippany-Troy Hills so as to protect the public health, safety and welfare and to prescribe certain penalties for failure to comply.
A. 
Word usage. When not inconsistent with the context, words used in the present tense include the future, words used in the plural number include the singular number, and words used in the singular number include the plural number. The word "shall" is always mandatory and not merely directory. The definitions below are the same as or based on corresponding definitions in the New Jersey Pollutant Discharge Elimination System (NJPDES) rules at N.J.A.C. 7:14A-1.2.
B. 
For the purposes of this chapter, the following terms, phrases, words and their derivations shall have the meanings stated herein unless their use in the text of this chapter clearly demonstrates a different meaning:
DOMESTIC SEWAGE
Waste and wastewater from humans or household operations.
ILLICIT CONNECTION
Any physical or nonphysical connection that discharges domestic sewage, noncontact cooling water, process wastewater or other industrial waste (other than stormwater) to the municipal separate storm sewer system operated by the Township of Parsippany-Troy Hills, unless that discharge is authorized under a NJPDES permit other than the Tier A Municipal Stormwater General Permit (NJPDES Permit Number NJ0141852). Nonphysical connections may include, but are not limited to, leaks, flows or overflows into the municipal separate storm sewer system.
INDUSTRIAL WASTE
Nondomestic waste, including, but not limited to, those pollutants regulated under Section 307(a), (b) or (c) of the Federal Clean Water Act [33 U.S.C. § 1317(a), (b) or (c).]
MUNICIPAL SEPARATE STORM SEWER SYSTEM (MS4)
A conveyance or system of conveyances (including roads with drainage systems, municipal streets, catch basins, curbs, gutters, ditches, man-made channels or storm drains) that is owned or operated by the Township of Parsippany-Troy Hills and is designed and used for collecting and conveying stormwater.
NJPDES PERMIT
A permit issued by the New Jersey Department of Environmental Protection to implement the New Jersey Pollutant Discharge Elimination System (NJPDES) rules at N.J.A.C. 7:14A.
NONCONTACT COOLING WATER
Water used to reduce temperature for the purpose of cooling. Such waters do not come into direct contact with any raw material, intermediate product (other than heat) or finished product. Noncontact cooling water may, however, contain algaecides or biocides to control fouling of equipment such as heat exchangers and/or corrosion inhibitors.
PERSON
Any individual, corporation, company, partnership, firm or association or political subdivision of this state subject to municipal jurisdiction.
PROCESS WASTEWATER
Any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, byproduct or waste product. Process wastewater includes, but is not limited to, leachate and cooling water other than noncontact cooling water.
REFUSE CONTAINER
Any waste container that a person controls whether owned, leased, or operated, including dumpsters, trash cans, garbage pails and plastic trash bags.
[Added 10-19-2010 by Ord. No. 2010:27]
STORM DRAIN INLET
An opening in a storm drain used to collect stormwater runoff and includes, but is not limited to, a grate inlet, curb-opening inlet, slotted inlet, and combination inlet.
[Added 12-14-2010 by Ord. No. 2010:38]
STORMWATER
Water resulting from precipitation (including rain and snow) that runs off the land's surface, is transmitted to the subsurface, is captured by separate storm sewers or other sewerage or drainage facilities or is conveyed by snow removal equipment.
WATERS OF THE STATE
The ocean and its estuaries, all springs, streams and bodies of surface water or groundwater, whether natural or artificial, within the boundaries of the State of New Jersey or subject to its jurisdiction.
[Added 10-19-2010 by Ord. No. 2010:27]
A. 
The spilling, dumping or disposal of materials other than stormwater into the municipal separate storm sewer system (MS4) operated by the Township of Parsippany-Troy Hills is prohibited. The spilling, dumping or disposal of materials other than stormwater in such a manner as to cause the discharge of pollutants to the municipal separate storm sewer system is also prohibited.
B. 
Any person who controls, whether owned, leased or operated, a refuse container or dumpster must ensure that such container or dumpster is covered at all times and shall prevent the spilling out or overflowing of refuse.
[Added 10-19-2010 by Ord. No. 2010:27]
C. 
Any person who owns, leases or otherwise uses a refuse container or dumpster must ensure that such container or dumpster does not leak or otherwise discharge liquids, semiliquids, or solids to the municipal separate storm sewer system(s) operated by the Township.
[Added 10-19-2010 by Ord. No. 2010:27]
[Amended 10-19-2010 by Ord. No. 2010:27]
Exceptions to the prohibitions described in § 357-3 above include the following:
A. 
Water line flushing and discharges from potable water sources.
B. 
Uncontaminated groundwater (e.g., infiltration, crawl space or basement sump pumps, foundation or footing drains, rising groundwaters).
C. 
Air-conditioning condensate (excluding contact and noncontact cooling water).
D. 
Irrigation water (including landscape and lawn watering runoff).
E. 
Flows from springs, riparian habitats and wetlands, water reservoir discharges and diverted stream flows.
F. 
Residential car washing water and residential swimming pool discharges.
G. 
Sidewalk, driveway and street wash water.
H. 
Flows from fire-fighting activities.
I. 
Flows from rinsing of the following equipment with clean water:
(1) 
Beach maintenance equipment immediately following its use for its intended purposes;
(2) 
Equipment used in the application of salt and de-icing materials immediately following salt and de-icing material applications. Prior to rinsing with clean water, all residual salt and de-icing materials must be removed from equipment and vehicles to the maximum extent practicable using dry cleaning methods (e.g., shoveling and sweeping). Recovered materials are to be returned to storage for reuse or properly discarded. Rinsing of equipment, as noted in the above situation, is limited to exterior, undercarriage and exposed parts and does not apply to engines or other enclosed machinery.
J. 
Permitted temporary demolition containers.
K. 
Litter receptacles, other than dumpsters or other bulk containers.
L. 
Individual homeowner trash and recycling containers.
M. 
Refuse containers at facilities authorized to discharge stormwater under a valid NJDES permit.
N. 
Large bulky items, such as furniture, bound carpet and padding, and white goods placed curbside for pickup.
No person shall discharge or cause to be discharged through an illicit connection to the municipal separate storm sewer system operated by the Township of Parsippany-Troy Hills any domestic sewage, noncontact cooling water, process wastewater or any other industrial waste (other than stormwater).
[Added 12-14-2010 by Ord. No. 2010:38[1]]
A. 
Prohibited conduct. No person in control of private property (except a residential lot with one single-family house) shall authorize the repaving, repairing (excluding the repair of individual potholes), resurfacing (including top coating or chip sealing with asphalt emulsion or a thin base of hot bitumen), reconstructing or altering any surface that is in direct contact with an existing storm drain inlet on that property unless the storm drain inlet either:
(1) 
Already meets the design standard in Subsection B below to control passage of solid and floatable materials; or
(2) 
Is retrofitted or replaced to meet the standard in Subsection B below prior to the completion of the project.
B. 
Design standard. Storm drain inlets shall comply with the following standard to control passage of solid and floatable materials through storm drain inlets. For purposes of this subsection, "solid and floatable materials" means sediment, debris, trash, and other floating, suspended, or settleable solids. For exemptions to this standard see Subsection B(3) below.
(1) 
Grates.
(a) 
Design engineers shall use either of the following grates whenever a grate is used in pavement or another ground surface to collect stormwater from that surface into a storm drain or surface water body under that grate:
[1] 
The New Jersey Department of Transportation (NJDOT) bicycle safe grate, which is described in Chapter 2.4 of the NJDOT Bicycle Compatible Roadways and Bikeways Planning and Design Guidelines (April 1996); or
[2] 
A different grate, if each individual clear space in that grate has an area of no more than 7.0 square inches, or is no greater than 0.5 inch across the smallest dimension.
(b) 
Examples of grates subject to this standard include grates in grate inlets, the grate portion (non-curb-opening portion) of combination inlets, grates on storm sewer manholes, ditch grates, trench grates, and grates of spacer bars in slotted drains. Examples of ground surfaces include surfaces of roads (including bridges), driveways, parking areas, bikeways, plazas, sidewalks, lawns, fields, open channels, and stormwater basin floors.
(2) 
Whenever design engineers use a curb-opening inlet, the clear space in that curb opening (or each individual clear space, if the curb opening has two or more clear spaces) shall have an area of no more than 7.0 square inches, or be no greater than 2.0 inches across the smallest dimension.
(3) 
This standard does not apply:
(a) 
Where the Municipal Engineer agrees that this standard would cause inadequate hydraulic performance that could not practicably be overcome by using additional or larger storm drain inlets that meet these standards;
(b) 
Where flows are conveyed through any device (e.g., end-of-pipe netting facility, manufactured treatment device, or a catch basin hood) that is designed, at a minimum, to prevent delivery of all solid and floatable materials that could not pass through one of the following:
[1] 
A rectangular space 4 5/8 inches long and 1 1/2 inches wide (This option does not apply for outfall netting facilities.); or
[2] 
A bar screen having a bar spacing of 0.5 inch.
(c) 
Where flows are conveyed through a trash rack that has parallel bars with one-inch spacing between the bars; or
(d) 
Where the New Jersey Department of Environmental Protection determines, pursuant to the New Jersey Register of Historic Places Rules at N.J.A.C. 7:4-7.2(c), that action to meet this standard is an undertaking that constitutes an encroachment or will damage or destroy the New Jersey Register listed historic property.
C. 
Permit required. To ensure compliance with § 357-6 of this chapter, it shall be unlawful for any person to resurface or restripe any parking lot or parking area without first obtaining a permit and making payment of a fee of $50 to the Division of Engineering.
[1]
Editor's Note: This ordinance also redesignated former § 357-6 as § 357-7.
This chapter shall be enforced by the Health Officer, or any of his authorized representatives, or the Police Department.
[Added 12-14-2010 by Ord. No. 2010:38 ]
Any person violating this chapter shall be subject to any penalties imposed pursuant to § 1-17 of the Code.