Exciting enhancements are coming soon to eCode360! Learn more 🡪
Town of Milton, WI
Rock County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
Code
New Laws (0) Index
No sign shall hereafter be located, erected, moved, reconstructed, extended, enlarged, converted, or structurally altered without a sign permit, except those signs permitted under § 400-112, and without being in conformity with the provisions of this chapter, § 84.30, Wis. Stats., and Ch. Trans 201, Wis. Adm. Code. The sign shall also meet all the structural requirements of local and state building codes.
Signs permitted in all districts without a sign permit: nonlighted on-premises signs not to exceed 16 square feet on each of two sides.
Signs permitted in all districts with a sign permit:
A. 
Nonlighted on-premises signs that exceed 16 square feet on each of two sides.
B. 
Fees for sign permits shall be as set from time to time by resolution of the Town Board.[1]
[1]
Editor's Note: Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. I).
A. 
Any sign that exceeds 54 square feet will require a building permit.
B. 
Fees for sign building permits shall be as set from time to time by resolution of the Town Board.[1]
[1]
Editor's Note: Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. I).
All off-premises signs shall require a conditional use permit from the Town Board. An additional fee for a sign permit is not required.
Illuminated signs shall require a conditional use permit from the Town Board. An additional fee for a sign permit is not required.
Signs lawfully existing at the time of the adoption or amendment of this chapter may be continued although the use, sign, or location does not conform with the provisions of this chapter.
All signs must be maintained by owner.
The location of any sign may be set by the Town Board on the recommendation of the Planning and Zoning Committee.