The sketch plan shall consist of a drawing based on tax map
information or some other similarly accurate base map, at a scale
(preferably not less than 200 feet to the inch) to enable the entire
ownership of the subdivider to be shown on one sheet, and shall show:
A.
The location of that portion of the subdivider's ownership which
is to be subdivided in relation to the whole and the location of nearby
streets and roads.
B.
All existing structures, wooded areas and permanent and intermittent
watercourses within the portion to be subdivided and within 200 feet
thereof.
C.
The name of the owner(s) of the property to be subdivided and of
all adjoining property owners as disclosed by the most recent municipal
tax records.
D.
The tax map sheet, block and lot numbers.
E.
All available utilities and streets.
F.
The proposed lot layout, street layout and any proposed recreation
or open space areas.
G.
All existing restrictions on the use of the land, including easements
or covenants.
H.
Special flood hazard areas.
Application for minor subdivision plat approval shall include:
A.
Plat.
(1)
The plat to be filed with the County Clerk, at a scale of not more
than 200 but not less than 50 feet to the inch, drawn in ink, which
shall show:
(a)
Proposed subdivision name, Village of Corinth, Saratoga County,
and the names of all adjoining property owners.
(b)
North point, map, scale and name and address of the subdivider,
the owner(s) of record and engineer or surveyor, if any, including
license number and seal.
(c)
The boundary lines of the tract, giving complete descriptive
data, by bearings and distances, if a survey is made. The corners
of whatever part or parts of the tract may be offered for sale to
the public shall also be located on the ground and marked by monuments,
as approved by the Planning Board, and shall be as shown on the plat.
(d)
All existing structures, easements, wooded areas and permanent
and intermittent watercourses.
(2)
The size of the sheet upon which the plat is drawn shall be not less
than 8 1/2 inches by 11 inches nor more than 34 inches by 44
inches.
B.
Design of all proposed utilities, including sewer and water lines.
C.
A copy of the deed(s) relating to the property to be subdivided and
such proposed covenants or deed restrictions as may be intended to
apply to the property, in whole or in part.
D.
Completed application form as provided by the Clerk of the Planning
Board.
An application for preliminary plat approval shall include:
A.
Plat.
(1)
The preliminary plat, clearly marked "Preliminary Plat," at a scale
of not more than 100 but not less than 50 feet to the inch, which
shall show:
(a)
Proposed subdivision name or identifying title, Village of Corinth,
Saratoga County, and the names of all adjoining property owners.
(b)
North point, map, scale and name and address of subdivider,
owner(s) of record and engineer or surveyor, including license number
and seal.
(c)
The boundary lines of the tract as determined by actual field
survey, giving complete descriptive data by bearings and distances,
made and certified to by a licensed land surveyor and bearing the
date of the completing of the survey. The corners of the tract shall
also be located on the ground and marked by substantial monuments
of such size and type, as approved by the Planning Board, and shall
be shown on the plat.
(d)
Topographic contours, at intervals of 10 feet, including elevations
on existing roads and approximate grading plan if natural contours
are to be changed by more than two feet.
(e)
Location of existing structures, easements, permanent and intermittent
watercourses, wetlands, rock outcrops, wooded areas and other significant
existing features for the proposed subdivision and adjacent property.
(f)
Location of existing sewers, water mains, culverts and drains
on the property, with pipe sizes, grades and direction of flow.
(g)
The width and location of any streets or roads within the area
to be subdivided, shown on the Official Map if such exists, and the
width, location and grades of all streets or roads proposed by the
subdivider.
(h)
The proposed lot lines with approximate dimensions and area
of each lot.
(i)
The approximate location and size of all proposed waterlines,
valves, hydrants and sewer lines and fire alarm boxes and connections
to existing lines. Alternate means of water supply or sewage disposal
and treatment shall be indicated.
(j)
A storm drainage plan indicating the approximate location and
size of proposed lines or ditches and any alternate means of drainage.
(k)
Preliminary design of any proposed bridges or culverts.
(l)
Typical lot layout(s), with building and on-site sewage disposal
system sites.
(m)
Typical clearing and grading cross section for construction
of roads and installation of utilities.
(n)
Proposed recreational or open space areas, including parcels
or land proposed to be dedicated to public use.
(2)
When more than one sheet is required, an additional index sheet of
the same size shall be submitted showing to scale the entire subdivision
with lot and block numbers clearly legible.
B.
If the application covers only a part of the subdivider's entire
holding, a map of the entire tract, drawn at a scale of not less than
400 feet to the inch, showing all existing streets; an outline of
the platted area with its proposed streets; and an indication of the
probable future street and drainage systems (if any) in the remaining
portion of the tract with its grades and drainage.
C.
Design of all proposed public utilities, including water and sewage
systems.
D.
A copy of such proposed covenants or deed restrictions as may be
intended to apply to the property in whole or in part.
An application for major subdivision plat approval shall include:
A.
Plat.
(1)
The plat to be filed with the County Clerk at a scale of not more
than 100 but not less than 50 feet to the inch, clearly drawn in ink,
which shall show:
(a)
Proposed subdivision name or identifying title, Village of Corinth,
Saratoga County, and names of all adjoining property owners.
(b)
North point, map scale and name and address of the subdivider,
owner(s) of record and engineer or surveyor, including license number
and seal.
(c)
The location of all boundary lines, proposed street lines and
lot lines, as determined by actual field survey, including the length
and bearings of straight lines and length and radii of all curves.
All dimensions shall be shown in feet and decimals thereof. Such survey
shall be made and certified to by a licensed land surveyor, and the
plat shall bear the date of the completion of the survey. Referenced
on the plat shall be:
[1]
Monuments of a type approved by the Planning Board set at all
corners and angle points of the original tract to be subdivided, all
street intersections, angles in street lines, points of curve and
such other points as may be required by the Planning Board; and
[2]
Permanently lodged lot corner markers of at least 3/4 inch in
diameter and 24 inches in length, located in the ground to existing
grade.
(d)
Topographic contours, at intervals of five feet or less as required
by the Board, including elevations on existing roads and final grading
plan if natural contours are to be changed by more than two feet.
(e)
Location of existing structures, easements, permanent and intermittent
watercourses, wetlands, rock outcrops, wooded areas, single trees
with a diameter of 24 inches or more as measured at breast height
and other significant existing features for the proposed subdivision
and adjacent property.
(f)
Location of existing sewers, water mains, culverts and drains
on the property, with pipe sizes, grades and direction of flow.
(g)
The location and size of all proposed waterlines, valves, hydrants
and sewer lines and fire alarm boxes and connections to existing lines.
(h)
A storm drainage plan indicating the location and size of proposed
lines or ditches and their profiles and connections to existing lines
or ditches.
(i)
Final design of any proposed bridges or culverts.
(j)
All recreational or open space areas, including parcels of land
proposed to be dedicated.
(k)
Typical lot layout(s) with building and on-site sewage disposal
sites.
(l)
Typical clearing and grading cross sections for construction
of roads and installation of utilities.
(2)
The size of the sheets shall be not less than 8 1/2 inches by
11 inches nor more than 34 inches by 44 inches.
(3)
When more than one sheet is required, an additional index sheet of
the same size shall be filed showing to scale the entire subdivision
with lot and block numbers clearly legible.
B.
Design of all proposed public utilities, including water and sewage
lines.
C.
Offers of cession and deeds for any recreational or open space areas
to be dedicated to the Village and for such areas title to which is
to be retained by the subdivider, copies of agreements or other documents
showing the manner in which such areas are to be maintained and the
provisions made therefor. Such offers, deeds, agreements or other
documents shall bear the approval of the Village Attorney as to their
legal sufficiency.
