A. 
Description and purpose. This district is intended to allow primarily indoor industrial, storage, office, and other associated business and support uses. Allowable uses are geared toward activities which are not associated with high levels of noise, odor, particulate emissions, and other potential nuisances. Outdoor uses are limited to those that are accessory to indoor principal uses. Architectural, site design, landscaping, and other requirements are intended to ensure compatibility with nearby residential, institutional, and conservancy uses. All uses in this district shall be provided with public sanitary sewer and water services.
B. 
Uses. For principal and accessory uses permitted by right or as a conditional use and allowable temporary uses, refer to the Table of Land Uses included as an attachment to this chapter. See § 510-38.
C. 
Overlay district requirements. All lots, uses, structures, and site features within one or more overlay zoning districts (see Article X) shall be subject to the regulations of the applicable overlay zoning district in addition to those of the underlying standard zoning district. Where there are conflicts between the standard zoning district regulations and the overlay zoning district regulations, the more restrictive requirements shall prevail.
D. 
Performance standards. All allowed uses in the LI Zoning District shall comply with applicable performance standards of Article XIII, except for any exemptions specifically stated in this chapter or by any other agency with jurisdiction.
E. 
Landscaping regulations. All landscaping in the LI Zoning District shall comply with applicable provisions of Article XIV.
F. 
Signage regulations. All signs in the LI Zoning District shall comply with applicable provisions of Article XV.
G. 
Nonconforming situations. Any nonconforming lot, use, structure and/or site shall adhere to the provisions of Article IX.
H. 
Intensity and bulk regulations for nonresidential uses. Intensity and bulk regulations specific to the LI Zoning District are detailed below. See Articles VII and VIII for additional requirements applicable to all zoning districts.
(1) 
Minimum lot area: 40,000 square feet.
(2) 
Maximum building coverage of lot: 75% of net lot area.
(3) 
Maximum impervious coverage of lot: 85% of net lot area.
(4) 
Minimum lot width: 100 feet.
(5) 
Minimum street setback: 25 feet.
(6) 
Minimum side setback: 25 feet.
(7) 
Minimum rear setback: 25 feet.
(8) 
Maximum principal building height: 45 feet.
(9) 
Minimum principal building separation (multi-structure developments on shared lots): 50 feet.
(10) 
Minimum pavement setback (lot line to pavement; excludes driveway entrances): five feet.
(11) 
Minimum parking required: per Article VI.
(12) 
Accessory building side setback: five feet.
(13) 
Accessory building rear setback: five feet.
(14) 
Maximum accessory building height: 45 feet.
[1]
Editor's Note: Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. II).
A. 
Description and purpose. This district is intended to allow industrial, office, storage, and other supporting uses, including those land uses that may require more extensive outdoor storage, freight handling, repair, and maintenance activities than allowed in the LI District. Allowable uses are geared toward activities which are not associated with high levels of noise, odor, particulate emissions, and other potential nuisances that cannot be adequately fully mitigated on site. Architectural, site design, landscaping, and other requirements are intended to minimize impacts and potential nuisances to other land uses. All uses in this district shall be provided with public sanitary sewer and water services.
B. 
Uses. For principal and accessory uses permitted by right or as a conditional use and allowable temporary uses, refer to the Table of Land Uses included as an attachment to this chapter. See § 510-38.
C. 
Overlay district requirements. All lots, uses, structures, and site features within one or more overlay zoning districts (see Article X) shall be subject to the regulations of the applicable overlay zoning district in addition to those of the underlying standard zoning district. Where there are conflicts between the standard zoning district regulations and the overlay zoning district regulations, the more restrictive requirements shall prevail.
D. 
Performance standards. All allowed uses in the GI Zoning District shall comply with applicable performance standards of Article XIII, except for any exemptions specifically stated in this chapter or by any other agency with jurisdiction.
E. 
Landscaping regulations. All landscaping in the GI Zoning District shall comply with applicable provisions of Article XIV.
F. 
Signage regulations. All signs in the GI Zoning District shall comply with applicable provisions of Article XV.
G. 
Nonconforming situations. Any nonconforming lot, use, structure and/or site shall adhere to the provisions of Article IX.
H. 
Intensity and bulk regulations for nonresidential uses. Intensity and bulk regulations specific to the GI Zoning District are detailed below. See Articles VII and VIII for additional requirements applicable to all zoning districts.
(1) 
Minimum lot area: 40,000 square feet.
(2) 
Maximum building coverage of lot: 75% of net lot area.
(3) 
Maximum impervious coverage of lot: 85% of net lot area.
(4) 
Minimum lot width: 100 feet.
(5) 
Minimum street setback: 25 feet.
(6) 
Minimum side setback: 25 feet.
(7) 
Minimum rear setback: 25 feet.
(8) 
Maximum principal building height: 45 feet.
(9) 
Minimum principal building separation (multi-structure developments on shared lots): 50 feet.
(10) 
Minimum pavement setback (lot line to pavement; excludes driveway entrances): five feet.
(11) 
Minimum parking required: per Article VI.
(12) 
Accessory building side setback: five feet.
(13) 
Accessory building rear setback: five feet.
(14) 
Maximum accessory building height: 45 feet.
[1]
Editor's Note: Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. II).