[Adopted 6-19-2006 by Ord. No. 2006-3]
A.
Residential (one- and two-family dwellings). (Fees include mechanical
inspections.)
|
New construction
|
$40, plus $0.15 per square foot of GFA*
| ||
|
Additions
|
$40, plus $0.15 per square foot of GFA*
| ||
|
Repairs and alterations
|
$40, plus 0.75% of construction cost
| ||
|
Manufactured dwellings:
| |||
|
On piers
|
$40, plus $0.10 per square foot
| ||
|
With basement
|
$40, plus $0.12 per square foot
| ||
|
Utility and miscellaneous use groups (decks, towers, retaining
walls, fences)
|
$50
| ||
|
Swimming pools:
| |||
|
In-ground
|
$50
| ||
|
Aboveground
|
$40
| ||
|
Demolition
|
$40, plus 0.65% of demolition cost
| ||
|
NOTES:
| ||
|---|---|---|
|
*
|
GFA = "Gross floor area" is defined as the total square footage
of all floors within the perimeter of the outside walls, including
finished basements and attics with floor-to-ceiling heights of 6 feet
6 inches or more.
| |
|
**
|
Construction cost shall be total bid minus electrical, mechanical,
plumbing and finishes.
| |
B.
All other use groups (commercial).
|
New construction and additions
|
$60, plus $0.19 per square foot of GFA*
| |
|
Alterations
|
$60, plus 0.85% of construction cost**
| |
|
Swimming pools
|
$350
| |
|
Demolition
|
$40, plus 0.85% of demolition cost
|
|
NOTES:
| ||
|---|---|---|
|
*
|
GFA = "Gross floor area" is defined as the total square footage
of all floors within the perimeter of the outside walls, including
finished basements and attics with floor-to-ceiling heights of 6 feet
6 inches or more.
| |
|
**
|
Construction cost shall be total bid minus electrical, mechanical,
plumbing and finishes.
| |
A.
Fee by occupancy classification.
|
IBC Occupancy Classification
|
Fee
| |
|---|---|---|
|
"B," "E," "M," "R-1," "R-2"
|
Up to and including 15,000 square feet = $0.08/square foot
| |
|
"R-4"
|
Greater than 15,000 square feet = $1,200, plus $0.05/square
foot
| |
|
"A," "I" and "H"
|
Up to and including 10,000 square feet = $0.10/square foot
| |
|
Greater than 10,000 square feet = $1,000, plus $0.05/square
foot
| ||
|
"F," "S" and "U"
|
Up to and including 20,000 square feet = $0.05/square foot
| |
|
Greater than 20,000 square feet = $1,000, plus $0.03/square
foot
|
B.
Minimum fee: $350.
A.
Fee schedule (other than residential). (All switches, luminaries
and receptacles to be counted as outlets.)
|
Rough wire inspection:
| |||
|
1 to 25 outlets
|
$27
| ||
|
For each additional 10 outlets or fraction thereof
|
$6
| ||
|
Finish inspection:
| |||
|
1 to 25 outlets
|
$27
| ||
|
For each additional 10 outlets or fraction thereof
|
$6
| ||
|
Equipment - appliances:
| |||
|
Outlet for single unit of 15 KW or less
|
$24
| ||
|
Each additional outlet of 15 KW or less
|
$9
| ||
|
Motors, generators, transformers, central heating, duct heaters,
air conditioning, electric furnaces and welders:
| |||
|
Fractional HP, KW or KVA to 1 HP, KW or KVA, each
|
$13
| ||
|
1 HP, KW or KVA to 3 HP, KW or KVA, each
|
$15
| ||
|
4 HP, KW or KVA to 7 HP, KW or KVA, each
|
$22
| ||
|
7 1/2 HP, KW or KVA to 29 HP, KW or KVA, each
|
$27
| ||
|
30 HP, KW or KVA to 49 HP, KW or KVA, each
|
$43
| ||
|
50 HP, KW or KVA to 74 HP, KW or KVA, each
|
$54
| ||
|
75 HP, KW or KVA to 199 HP, KW or KVA, each
|
$108
| ||
|
200 HP, KW or KVA to 500 HP, KW or KVA, each
|
$215
| ||
|
Over 500 HP, KW or KVA, each
|
$270
| ||
|
Over 600 volts
|
Add $100 per category
| ||
|
Feeders or subpanels:
| |||
|
Not over 200 AMP
|
$25
| ||
|
Over 200 AMP to 400 AMP
|
$35
| ||
|
Over 400 AMP to 600 AMP
|
$45
| ||
|
Over 600 AMP to 1600 AMP
|
$100
| ||
|
Over 1,600 AMP
|
$135
| ||
|
Over 600 volts
|
Add $100 per category
| ||
|
Modular and mobile homes:
| |||
|
Modular homes - service and outlets
|
$75
| ||
|
Mobile homes - service, including feeder or receptacle
|
$60
| ||
|
Feeder or power cord only
|
$55
| ||
|
Service - meter equipment up to 600 volts:
| |||
|
Not over 150 AMP
|
$50
| ||
|
Over 150 AMP to 200 AMP
|
$55
| ||
|
Over 200 AMP to 400 AMP
|
$75
| ||
|
Over 400 AMP to 600 AMP
|
$95
| ||
|
Over 600 AMP to 1,200 AMP
|
$200
| ||
|
Over 1,200 AMP to 1,600 AMP
|
$225
| ||
|
Over 1,600 AMP to 2,000 AMP
|
$275
| ||
|
Over 2,000 AMP to 3,000 AMP
|
$325
| ||
|
Over 3,000 AMP
|
$400
| ||
|
Ground fault protected services
|
Add $75
| ||
|
Over 600 volts
|
Add $100 per category
| ||
|
Services exceeding 1 meter
|
$10 for each additional meter
| ||
|
Primary transformers, vaults, enclosures, substations:
| |||
|
Not over 200 KVA
|
$200
| ||
|
Over 200 KVA to 500 KVA
|
$250
| ||
|
Over 500 KVA to 1000 KVA
|
$300
| ||
|
Over 1,000 KVA
|
$350
| ||
|
Signaling systems: (Burglar alarms, fire alarms, fire-suppression
alarms, smoke detectors, telemetering, telephones or CATV outlets
are each separate systems.)
| |||
|
For the system and first 15 devices
|
$55
| ||
|
Each additional 10 devices or fraction thereof
|
$6
| ||
|
Signs (incandescent, fluorescent and neon):
| |||
|
First sign (per occupancy)
|
$55
| ||
|
Each additional sign (per occupancy)
|
$9
| ||
|
Outline lighting:
| |||
|
First transformer
|
$55
| ||
|
Each additional transformer
|
$9
| ||
|
Swimming pools:
| |||
|
Bonding
|
$60
| ||
|
Equipment/wiring (residential only)
|
$65
| ||
|
Commercial
|
By fee schedule
| ||
B.
Residential fees (flat rate schedule*).
|
Single-family dwelling, not over 200 AMP service
|
$125
| ||
|
2-family dwelling units, not over 200 AMP service
|
$150
| ||
|
Over 2-family dwelling:
| |||
|
First 2 units (each)
|
$70
| ||
|
Each additional unit
|
$40
| ||
|
Townhouses, each
|
$60
| ||
|
Alterations and additions (service and 25 outlets or less)
|
$100
| ||
|
NOTES:
| |||
|---|---|---|---|
|
*
|
Add service equipment.
| ||
|
Single-family dwellings with over 200 AMP service: apply flat
rate schedule, plus equipment, appliances and motor schedule.
| |||
|
Dwelling with a spa, hot tub, hydromassage tub, sauna, etc.:
apply flat rate schedule, plus $25 for each item.
| |||
HVAC permits (all buildings except one- and two-family).
|
Property maintenance and code enforcement services
|
$50 per hour
|
