[1]
Editor's Note: Former §§ 525.020,
Regulations Concerning The Construction And Maintenance Of Driveways
Across Public Right-Of-Way, and 525.030, Street Specifications, were
repealed 9-6-2011 by Ord. No. 2797-11 § 2.
[R.O. 1991 § 525.040; Ord. No. 1742-97 § 1, 7-15-1997; Ord. No. 3175-23, 2-21-2023]
A.
All fences containing uninsulated electric
conductors that may be exposed to human contact otherwise prohibited
in the Zoning Code are permitted as contained herein and must meet
or exceed the following standards:
1.
In Industrial Zones:
a.
Must obtain a separate fence permit for the electric fence, which is in addition to the permit required for the primary, non-electric fence required in Subsection (A)(1)(d) below.
b.
The system may not exceed twelve (12) volts.
c.
The system used to energize the electric fence must be listed by
a national testing agency such as UL or ETL.
d.
The entire electric fence must be inside or enclosed by a primary
non-electric perimeter security fence a minimum of six (6) feet in
height and located no closer than five (5) feet to the electric fence.
e.
Warning signs must be displayed every fifty (50) feet clearly identifying
the fence as an electric fence.
2.
In Agricultural Zone 1:
a.
Electric fences may be installed not closer than seventy-five (75)
feet from the property line of any adjacent property located in a
district that is not allowed to install an electric fence, and not
within five (5) feet of any other property line, and no permit is
required for such installation.
