The purposes of this district are to provide for continued high-density,
single-family residential development; to preserve existing single-family
development; and to provide for and regulate certain uses permitted
by special exception.
Land, building or premises shall be used by right only for one
or more of the following uses:
A. All uses permitted by right in the R-1 District.
The following uses shall be permitted by special exception only, subject to the applicable provisions of Articles
XXI and
XXV.
A. Single-family semidetached dwelling (twin), subject to §Â
600-186.
The following shall be permitted as conditional uses only, subject to Article
XXII and the provisions cited below:
As noted in R-1 District, §Â
600-14, and subject to the provisions of §Â
600-159.
Unless specifically stated otherwise, the following shall be
minimum requirements:
A. Single-family detached dwelling.
(1)Â Lot size: 5,000 square feet.
(3)Â Building coverage: 35%, maximum.
(4)Â Street frontage: 50 feet, and 35 feet at cul-de-sac turns.
(5)Â Impervious surface: 55%, maximum.
(6)Â Front yard:
(b)Â
Corner lot: 25 feet on front street and 15 feet on side street.
(7)Â Side yards: 20 feet, aggregate, and eight feet, minimum.
(9)Â Height: two stories, maximum, and 35 feet, maximum.
B. Single-family semidetached dwellings (twins). Single-family semidetached dwellings (twins) shall be permitted by special exception only subject to the requirements of §Â
600-186.
If a homeowners' association is required for any development located within the R-3 District, it shall adhere to the requirements of §Â
600-179.