[Ord. No. 11-2I 118 §1, 5-12-2016]
General. All detours/lane closures must be handled using traffic control devices conforming to the most current edition of the "Manual on Uniform Traffic Control Devices" (MUTCD), and must be approved by the City. The manual, produced by the United States Department of Transportation, Federal Highway Administration, may be viewed on their internet website and printed at no charge. The MUTCD internet website address is http://muted.fhwa.dot.gov/
[Ord. No. 11-2I 118 §1, 5-12-2016]
A. 
Sign Construction. The City shall determine the required signing necessary to be installed on public rights-of-way. All signs must conform to current MUTCD standards and shall be furnished by the contractor unless otherwise directed by the City.
1. 
Sign post shall consist of two (2) inch by two (2) inch twelve (12) gauge perforated square steel posts. All sign post shall be constructed using a break-away anchor sleeve sized to the manufacturer's recommended specifications based on post size. All installation shall be in a plumb position.
2. 
Refer to Table VII-4 for number of required post based on sign size.
Table X-1
Post Size Requirements
Sign Area
(Square Feet)
Perforated Square Steel Post
< 10
1 - 2 inch, 12 gauge*
> 10 < 16
2 - 2 inch, 12 gauge
> 16 < 24
3 - 2 inch, 12 gauge
*
Signs greater than four (4) feet in width, except diamond shape signs, require 2 post.