A. 
The Village's manufacturing districts are listed in Table 22.1 below. When this chapter refers to a manufacturing district, it is referring to one of the following:
Table 22.1: Manufacturing Districts
Manufacturing District Name
Abbreviation and Map Symbol
General Manufacturing
GM
Village Manufacturing
VM
B. 
The manufacturing district names and map symbols are intended to provide a general indication of what is allowed in the district by denoting the intensity, scale, and/or type of uses permitted.
A. 
General Manufacturing (GM) District. The purpose of the GM District is to permit the operation of light commercial, industrial, manufacturing, and distribution activities within the Village in a manner that is consistent with the Village's adopted Comprehensive Plan. Development within a GM District should be campus-style in building design and layout and should facilitate internal pedestrian circulation systems that are linked to external walkways, where practicable. Manufacturing and industrial uses allowable within this district shall employ techniques to minimize negative impacts on adjacent nonindustrial districts (including, but not limited to, traffic, parking, glare, noise, dust, odor, etc.), especially established residential districts and environmentally sensitive areas. The construction of new residential dwellings is not permitted within the GM District.
B. 
Village Manufacturing (VM) District. The purpose of the VM District is to permit the operation of low-impact industrial and commercial uses within the Village on smaller lot sizes than permitted in the General Manufacturing (GM) District. Due to the increased allowable density of the VM District and its general proximity to established neighborhoods and activity centers of the Village, all uses shall be properly screened and buffered from adjacent residential properties. Unless otherwise stated in this chapter, industrial and manufacturing uses permitted within the VM District shall operate within a fully enclosed structure, with limited external operations or storage visible from the public right-of-way or adjacent residential properties.
Uses are allowed in manufacturing zoning districts within the Village in accordance with Table 22.3 below.
A. 
Uses identified with a "P" in the table are permitted as-of-right in the zoning district, subject to compliance with all other applicable standards of this chapter.
B. 
Uses identified with a "SP" in the table may be allowed if reviewed and approved in accordance with the special use permit procedures contained in Article 52 of this chapter.
C. 
Uses not listed and those identified with a "-" are expressly prohibited.
Table 22.3: Manufacturing District Use Lists
[Amended 12-5-2022 by L.L. No. 10-2022]
Zoning District
Land Use
GM
VM
Residential
Single-family dwellings
-1
-1
Two-family dwellings or townhomes
-1
-1
Multifamily dwellings
-1
-1
Home occupations
SP
SP
Upper-floor dwelling units
SP
SP
Residential accessory uses or structures
P
P
Institutional/Other
Places of worship
SP
P
Nonprofit or membership based clubs
SP
P
Schools, public or private
SP
SP
Day-care centers, child or adult
-
-
Museums or libraries
-
-
Public parks or playgrounds
SP
-
Municipal structure or use
P
P
Parking area (not on same lot as the use it serves)
SP
SP
Commercial
Professional or medical offices
P
P
Breweries or distilleries
P
P
Restaurants or take-out restaurants
-
SP
Taverns or bars
-
SP
Vehicle sales
SP
-
Vehicle repair or service shops
SP
SP
Car washes
SP
-
Laundromats or dry-cleaners
SP
SP
Newspaper or printing shops
P
P
Dance, art, music, or photo studios
P
P
Indoor entertainment facilities
SP
SP
Outdoor entertainment facilities
SP
-
Indoor recreational facilities
SP
SP
Outdoor recreational facilities
SP
-
Retail stores or personal service establishments
-
SP
Repair or service shops
-
SP
Wholesale stores
SP
SP
Farm/agricultural goods sales or service
SP
SP
Adult uses
SP
-
Animal grooming shops
P
-
Animal hospitals or veterinary clinics
P
-
Kennels
SP
-
Broadcast facilities
P
-
Telecommunications facilities
SP
SP
Mixing of permitted uses in a single structure
P
P
Dining facilities ancillary to permitted use
SP
SP
Outdoor storage or sales ancillary to permitted use
P
SP
Nonresidential accessory uses or structures
P
P
Cannabis adult-use retail dispensary
-
SP
Cannabis adult-use cultivator
SP
SP
Cannabis adult-use nursery
SP
SP
Cannabis adult-use processor
SP
SP
Cannabis adult-use distributor
SP
SP
Cannabis adult-use cooperative
SP
SP
Cannabis adult-use microbusinesses
SP
SP
Cannabis adult-use delivery
SP
SP
Cannabis consumption establishment2
SP2
SP2
Manufacturing/Industrial
Manufacturing, processing, or production facilities
P
P
Packaging facilities
P
P
Research and development facilities
P
P
Junkyards
-
-
Self-storage facilities
P
-
Outdoor storage or sales ancillary to permitted use
P
SP
Notes:
1
Any residential dwelling existing prior to the adoption date of this chapter shall be considered a permitted use.
2
Currently, the Village has opted out of having cannabis consumption establishments within the Village limits. Therefore, this use is not currently permitted in any zone. The designation on this chart of cannabis consumption establishments permitted in the GM and VM Zoning Districts is reserved for the future should the Village Board adopt a local law that permits such establishments.
The lot and yard requirements listed in Table 22.4 below shall apply to the manufacturing districts within the Village.
Table 22.4: Manufacturing Lot and Yard Requirements
Zoning District
Land Use
GM
VM
A. Minimum Lot Size
Residential use
-
-
Nonresidential use
43,560 square feet
13,000 square feet
B. Minimum Lot Width
Residential use
-
-
Nonresidential use
100 feet
50 feet
C. Front Yard
Residential use
-
-
Nonresidential use
25 feet minimum
75 feet maximum
10 feet minimum
25 feet maximum
Accessory use/structure
-
-
D. Minimum Rear Yard
Residential use
-
-
Nonresidential use
15 feet OR 50 feet1
5 feet OR 25 feet1
Accessory use or structure
10 feet
5 feet
E. Minimum Side Yard
Residential use
-
-
Nonresidential use
15 feet OR 50 feet1
5 feet OR 25 feet1
Accessory use/structure
5 feet
5 feet
Note:
1
When adjacent to a residential use, the larger yard requirement shall apply.
The bulk requirements listed in Table 22.5 below shall apply to the manufacturing districts within the Village.
Table 22.5: Manufacturing Bulk Requirements
Zoning District
Land Use
GM
VM
A. Maximum Building Height
Residential use
-
-
Nonresidential use
45 feet
40 feet
Accessory use/structure
15 feet
10 feet
B. Maximum Lot Coverage
Residential use
-
-
Nonresidential use
30%
45%
Accessory use/structure
20% of rear yard
20% of rear yard
All other applicable requirements of this chapter, including but not limited to Article 31, Regulations for Certain Uses, and Part 4, Development Standards, shall also apply to uses in the manufacturing districts of the Village.