The purpose of this chapter is to require the retrofitting of
existing storm drain inlets which are in direct contact with repaving,
repairing, reconstruction or resurfacing or alterations of facilities
on private property, to prevent the discharge of solids and floatables
(such as plastic bottles, cans, food wrappers and other litter) to
the municipal separate storm sewer system(s) operated by the Township
of Byram so as to protect public health, safety and welfare, and to
prescribe penalties for the failure to comply.
For the purpose of this chapter, the following terms, phrases,
words and their derivations shall have the meanings stated herein
unless their use in the text of this chapter clearly demonstrates
a different meaning. When not inconsistent with the context, words
used in the present tense include the future, words used in the plural
number include the singular number, and words used in the singular
number include the plural number. The word" shall" is always mandatory
and not merely directory.
MUNICIPAL SEPARATE STORM SEWER SYSTEM (MS4)
A conveyance or system of conveyances (including roads with
drainage systems, municipal streets, catch basins, curbs, gutters,
ditches, man-made channels, or stormdrains) that is owned or operated
by the Township of Byram or other public body and is designed and
used for collecting and conveying stormwater.
PERSON
Any individual, corporation, company, partnership, firm,
association or political subdivision of this state subject to municipal
jurisdiction.
STORM DRAIN INLET
An opening in a storm drain used to collect stormwater runoff
and includes, but is not limited to, a grate inlet, curb-opening inlet,
slotted inlet and combination inlet.
WATERS OF THE STATE
The ocean and its estuaries, all springs, streams and bodies
of surface water or groundwater, whether natural or artificial, within
the boundaries of the State of New Jersey or subject to its jurisdiction.
No person in control of private property (except a residential
lot with one single-family house) shall authorize the repaving, repairing
(excluding the repair of individual potholes), resurfacing (including
top coating or chip sealing with asphalt emulsion or a thin base of
hot bitumen), reconstructing or altering of any surface that is in
direct contact with an existing stormdrain inlet on that property
unless the storm drain inlet either:
A. Already meets the design standard below to control passage of solid
and floatable materials; or
B. Is retrofitted or replaced to meet the standard in §
211-21 below prior to the completion of the project.
Storm drain inlets shall comply with the standard in §
211-14 to control passage of solid and floatable materials through storm drain inlets.