Pretreatment will be required for all industrial
wastes discharged by major industries, as defined in Title 40 of the
Code of Federal Regulations, for which pretreatment standards or other
requirements have been promulgated by the United States Environmental
Protection Agency in accordance with Section 307 of the Federal Water
Pollution Control Act Amendments of 1972; for any discharge requirements
developed by the New Jersey State Department of Environmental Protection;
or which, in the judgment of the Township, may have deleterious effect
upon the local sewer system, receiving water or life; or which, in
the judgment of the Musconetcong Sewerage Authority, may have a deleterious
effect upon the MSA sewer system.
If the MSA requires the pretreatment or flow
equalization of industrial wastes which are to be discharged into
the MSA sewerage system or the local collection sewer system, such
facilities shall require review and approval by the MSA prior to their
construction.
Where pretreatment or flow equalization facilities
are required for any industrial wastes discharged into the MSA sewerage
system or the local collection sewer system, they shall be continuously
maintained in satisfactory and effective operation by the user at
the user's expense and shall be operated and maintained in accordance
with the requirements of the New Jersey Department of Environmental
Protection (NJDEP) then in effect.
In such instances where it is agreed that the
industrial waste will be received following preliminary treatment,
drawings and specifications showing all pertinent details of the construction
proposed to accomplish the pretreatment, including details of the
indicator recorder-register type of flow meter and housing to be used
to meter the flow of industrial wastes and also details of the control
manhole to be constructed on the industrial wastes connection within
the sidewalk area shall be submitted for approval. The control manhole
shall be provided with adequate access manhole covers of approved
type, through which access shall be permitted to Township and MSA
personnel at all times, and shall include a sampling location. Drawings,
specifications, reports, etc., shall be submitted in quadruplicate
and shall be signed and sealed by a professional engineer registered
in the State of New Jersey who shall possess expertise in industrial
waste treatment and disposal design.
