A.
It is the intent of the R-4 District, as outlined
by the Upper Uwchlan Township Comprehensive Plan, to provide the opportunity
for high density residential development to occur in areas which are
compatible with established use patterns; located in areas of the
Township which contain environmental features generally suitable for
such development; and accessible to transportation systems and community
facilities appropriate for such development. The R-4 District is designed
to provide the opportunity for accommodating multifamily units at
a density consistent with the character of the Township.
B.
In the R-4 Residential District, the following regulations
shall apply.
A building may be erected, altered or used,
and a lot may be used or occupied, for any of the following purposes,
and no other:
A.
Any use permitted by right in the R-3 District.
B.
The following uses when authorized as a conditional use by the Board of Supervisors subject to § 200-116 of this chapter:
C.
Any accessory use permitted in the R-1 District.
D.
Adaptive reuse for historic preservation where indicated as a use by right in accordance with § 200-72.1.
[Added 9-19-2016 by Ord.
No. 2016-07]
E.
Group
homes.
[Added at time of adoption of Code (see Ch. 1, General Provisions,
Art. I)]
A.
Minimum lot area.
(1)
For a single-family detached dwelling, every lot shall
have an area of not less than 20,000 square feet, provided that, in
the case of an interior lot, any right-of-way or accessway connecting
such lot to a road or street shall be in addition to the minimum lot
area of 20,000 square feet.
(2)
For a two-family detached or single-family semidetached
dwelling, every lot shall have an area of not less than 15,000 square
feet per dwelling unit, provided that, in the case of an interior
lot, any right-of-way or accessway connecting such lot to a road or
street shall be in addition to the minimum lot area of 15,000 square
feet per dwelling unit.
(3)
For multifamily dwellings, every lot or tract containing
a multifamily development shall meet the following specifications:
(a)
The minimum tract size for multifamily development
shall be not less than 20 acres. Lots must be contiguous and cannot
straddle an existing roadway in the case of proposed development on
more than one tract.
(b)
The gross density for development of multifamily
dwellings shall not exceed four dwelling units per developable acre
once any slope over 25% and floodplain areas on the tract are removed
from the calculations. The total number of dwelling units permitted
shall be computed by subtracting those lands containing slope in excess
of 25% and floodplain as defined by this chapter, from the gross tract
area and multiplying by four.
(c)
The net density for development of multifamily
dwellings shall not exceed six dwelling units per acre.
(4)
For nonresidential uses and single-family detached
dwellings without both centralized sewer and public water, the area
and bulk regulations of the R-2 District shall apply.
B.
Minimum lot width.
(1)
For a single-family detached dwelling, every lot shall
not be less than 100 feet in width.
(2)
For a two-family detached or single-family semidetached
dwelling, every lot shall have an average aggregate lot width for
two dwelling units of 75 feet.
(3)
For multifamily dwellings, every tract containing
multifamily development shall not be less than 500 feet in width.
C.
Yard regulations. The following yards shall be provided:
(1)
A front yard of not less than 50 feet shall be provided
on each lot.
(2)
Two side yards of not less than 25 feet each shall
be provided on each lot.
(3)
A rear yard of not less than 40 feet shall be provided on each lot, unless the lot is a reverse frontage lot, in which case the requirements of § 200-75B shall apply.
(4)
For multifamily developments, there shall be a minimum
of seventy-five-foot setback provided from the entire tract boundary
within which no structure or parking shall be permitted.
(5)
There shall be a 100-foot setback from the ultimate
right-of-way of PA Route 100 regardless of which yard abuts the highway.
D.
Coverage regulations.
(1)
Building coverage. Not more than 30% of the area of
a lot, or tract in the case of a multifamily development, shall be
covered by buildings/structures.
(2)
Lot coverage. Not more than 45% of the area of a lot,
or tract in the case of a multifamily development, shall be covered
by buildings/structures and other impervious materials.
E.
Height restrictions. No structures or principal buildings
shall exceed 35 feet in height. No accessory building, other than
an accessory farm building, shall exceed 25 feet in height.
F.
Accessory buildings/structures. No accessory buildings
or structures shall be located within the front yard, nor within 10
feet of any side or rear lot line.
The standards of § 200-23 shall also apply to the R-4 District.
The standards of § 200-24 shall also apply to the R-4 District.