The general requirements affecting the use of buildings, structures and land and relating to the arrangement of buildings, structures and uses occupying a lot for each of the zoning districts established by Article III are hereby established in the Schedules of District Regulations, which are a part of this chapter and Article. The schedules are composed of pairs of tables entitled "Use Table" and "Bulk Table" for each zoning district.[1]
[1]
Editor's Note: These schedules and tables are included as attachments to this chapter.
A.
Columns. The Use Table is divided into columns with
each column headed by a capital letter for reference. Separate pages
divide the requirements for one district from those of another.
B.
Permitted uses, accessory uses and uses subject to
site plan review. In the Use Table, all uses listed in Column C are
permitted by right and subject to the bulk and supplemental requirements
as applicable. All uses listed in Column D are permitted only on approval
of a site plan by the Planning Board, some of which uses are conditioned
to special requirements that may be imposed to ensure compatibility
with neighboring uses. All uses listed in Column A are accessory to
principal uses (whether permitted by right or by site plan review)
and are permitted only in conjunction with the principal use identified
in Column B.
C.
Generic descriptions. Where any uses are identified
by a generic word or description, the Planning Board shall determine
whether a specific use shall be construed to be part of such generic
class. In making such determination, the Planning Board shall consider
to what extent the proposed use is similar to the class of use indicated
in the Use Table.
[1]
Editor's Note: The Use Table is included as an attachment to this chapter.
The uses identified in Columns C and D of the
Use Tables are aligned with numbers that appear in the Bulk Table
on the opposite page under headings relating to lot area, lot width
and depth, yard requirements, habitable floor area per dwelling unit,
dwelling units per acre, percent of lot coverage and building height
appropriate to each use. Accessory uses do not have respective bulk
requirements, and the requirements pertaining to the principal use
shall apply.
[1]
Editor's Note: The Bulk Table is included
as an attachment to of this chapter.
