Any dumpster or waste compactor unit (hereinafter "dumpster"), such as those used to receive the accumulation of solid waste on premises during the interval between waste collections, must comply with the following requirements:
A. 
Each dumpster shall be covered at all times by a tight-fitting cover which is capable of being locked.
B. 
Each dumpster shall be maintained in a clean, sanitary condition at all times with no solid waste on or outside the dumpster or the surrounding premises.
C. 
Each dumpster shall be locked during hours of nonuse.
D. 
Each dumpster shall not be located in the required setback area.
[Added 5-15-2018 by Order No. 18-116-01]
E. 
Each dumpster shall be visually screened from public streets and abutting residential properties by its location or by opaque fencing and/or landscaping.
[Added 5-15-2018 by Order No. 18-116-01]
F. 
Each dumpster shall be permanently labeled with the waste hauler's name and an identification number unique to the waste hauler. Such permanent label shall be orderly and shall not be drawn in spray paint without a proper stencil.
[Added 5-15-2018 by Order No. 18-116-01]
[1]
Editor’s Note: Former § 220-27, Violations and penalties, added 5-15-2018 by Order No. 18-116-01, was repealed 6-18-2019 by Order No. 19-274-01.
This article shall apply to all dumpsters, including, without limitation, those in place as of the date of adoption of this article.