The final plat, if required by this chapter, shall conform to
the applicable requirements of § 334 of the Real Property
Law of NYS as well as §§ 276, 277, 278 and 279 of the
Town Law of NYS as well as the NYS Land Surveying Practice Guidelines
that is approved by the NYS Board of Engineering and Land Surveying.
Such plat shall illustrate the information obtained from an actual
field survey of all of the lands that are the subject of an application,
giving complete descriptive data by bearings and distances, the location
and type of all monuments, and referenced corners of such lands; and
shall be made and certified to be true and accurate by a land surveyor.
A. Exemption(s).
(1) Survey of a lot of record greater than four acres. The final plat
does not have to illustrate all of the lands of a lot of record greater
than four acres, which such lot is the subject of an application.
However, such plat shall illustrate the lands of such lot that are
affected by the application, giving complete descriptive data and
bearings and distances, the location and type of all monuments, the
location and types of buildings or structures within 50 feet of the
lands affected by the application, and referenced corner of such lands;
and shall be made and certified to be true and accurate by a land
surveyor.