Swimming pools shall be maintained in a clean and sanitary condition,
and in good repair.
Private swimming pools, hot tubs, and spas, containing water
more than 24 inches (610 mm) in depth shall be completely surrounded
by a fence or barrier not less than 48 inches (1219 mm) in height
above the finished ground level measured on the side of the barrier
away from the pool. Gates and doors in such barriers shall be self-closing
and self-latching. Where the self-latching device is less than 54
inches (1372 mm) above the bottom of the gate, the release mechanism
shall be located on the pool side of the gate. Self-closing and self-latching
gates shall be maintained such that the gate will positively close
and latch when released from an open position of 6 inches (152 mm)
from the gatepost. No existing pool enclosure shall be removed, replaced,
or changed in a manner that reduces its effectiveness as a safety
barrier.
Exception: Spas or hot tubs with a safety cover
that complies with ASTM F 1346 shall be exempt from the provisions
of this section.
|