Prior to final release of the performance guarantee, the applicant
shall submit a maintenance bond from acceptable surety, in form approved
by the Township. The bond shall be in the amount of 15% of the original
approved construction cost estimate, and shall extend for two years
from the date of the resolution releasing the performance guarantee,
and remain in effect until an acceptable final inspection. No partial
maintenance bonds will be accepted.
Upon submission for acceptance (Form D), as-built plans shall
be submitted to the Township, using the following guidelines and check
list:
A. Drawing size: approximately 24 inches by 36 inches.
B. Name of development and lot and block number in title box, and "As-Built"
clearly labeled.
C. Horizontal scale: one inch equals 30 feet.
D. Date of as-built survey and name of surveyor.
H. All other utilities shown on plan or encountered.
I. Hydrant and valve locations.
J. Locations of house connections or services:
(1) Horizontal location, distance from main to curb stop, etc.
(2) Horizontal location of plugged end relative to two permanent structures.
K. Notations as to the finished elevations of building being served.
L. Location of pipe in easements (easements labeled).
M. Location of valves in easements (tie to existing structures).
N. Pipe materials:
(1) Main - size, material and class (class of pipe).
(2) Services - size, material and class.
O. Certifications:
(1) Drawings signed and sealed by developer's engineer (P.E. or
L.S.).
P. Transfer of ownership of easements and water facilities, using the
following wording:
(1) Water system easements shown on these drawings previously dedicated
to the Township and all water system facilities installed as shown
herein are hereby accepted by the Township of Allamuchy.
Q. Drawing materials - mylar or linen reproducibles (one set) and blue-line
prints (two sets) upon final acceptance.
R. Electronic files - compact disk containing the CADD generated files,
Release 14 or later, of the as-built plan.