[Added 9-2-2020 by L.L. No. 7-2020]
This article is adopted pursuant to §§ 19 and 20 of the General City Law and § 10 of the Municipal Home Rule Law of the State of New York.
This article is adopted to advance and protect the public health, safety, and welfare of the City by creating standards for the installation and use of solar energy generating systems and equipment and to make provision for, so far as conditions may permit, the accommodation of solar energy systems and equipment.
As used in this article, the following terms have the meanings indicated:
BUILDING-INTEGRATED SOLAR ENERGY SYSTEM
A combination of solar panels and solar energy equipment integrated into any building envelope system, such as vertical facades, semitransparent skylight systems, roofing materials, or shading over windows, which produce electricity for on-site consumption.
FARMLAND OF STATEWIDE IMPORTANCE
Land, designated as "farmland of statewide importance" in the U.S. Department of Agriculture Natural Resources Conservation Service's (NRCS) Soil Survey Geographic (SSURGO) Database on Web Soil Survey, that is of statewide importance for the production of food, feed, fiber, forage, and oilseed crops as determined by the appropriate state agency or agencies. Farmland of statewide importance may include tracts of land that have been designated for agriculture by state law.
GLARE
The effect by reflections of light with intensity sufficient, as determined in a commercially reasonable manner, to cause annoyance, discomfort, or loss in visual performance and visibility in any material respects.
GROUND-MOUNTED SOLAR ENERGY SYSTEM
A solar energy system that is anchored to the ground via a pole or other mounting system, detached from any other structure, that generates electricity for on-site or off-site consumption.
NATIVE PERENNIAL VEGETATION
Native wildflowers, forbs, and grasses that serve as habitat, forage, and migratory way stations for pollinators and shall not include any prohibited or regulated invasive species as determined by the New York State Department of Environmental Conservation.
POLLINATOR
Bees, birds, bats, and other insects or wildlife that pollinate flowering plants, including both wild and managed insects.
PRIME FARMLAND
Land, designated as "prime farmland" in the U.S. Department of Agriculture Natural Resources Conservation Service's (NRCS) Soil Survey Geographic (SSURGO) Database on Web Soil Survey, that has the best combination of physical and chemical characteristics for producing food, feed, forage, fiber, and oilseed crops and is also available for these land uses.
ROOF-MOUNTED SOLAR ENERGY SYSTEM
A solar energy system located on the roof of any legally permitted building or structure that produces electricity for on-site or off-site consumption.
SOLAR ACCESS
Space open to the sun and clear of overhangs or shade so as to permit the use of active and/or passive solar energy systems on individual properties.
SOLAR ENERGY EQUIPMENT
Electrical material, hardware, inverters, conduit, storage devices, or other electrical and photovoltaic equipment associated with the production of electricity.
SOLAR ENERGY SYSTEM
The components and subsystems required to convert solar energy into electric energy suitable for use. The term includes, but is not limited to, solar panels and solar energy equipment. The area of a solar energy system includes all the land inside the perimeter of the solar energy system, which extends to any interconnection equipment. A solar energy system is classified as a Tier 1, Tier 2, or Tier 3 solar energy system as follows:
A. 
Tier 1 solar energy systems include the following: roof-mounted solar energy systems and building-integrated solar energy systems.
B. 
Tier 2 solar energy systems include ground-mounted solar energy systems with a total surface area of all solar panels on the lot of up to 4,000 square feet and that generate up to 110% of the electricity consumed on the site over the previous 12 months.
C. 
Tier 3 solar energy systems are systems that are not included in the list for Tier 1 and Tier 2 solar energy systems.
SOLAR PANEL
A photovoltaic device capable of collecting and converting solar energy into electricity.
STORAGE BATTERY
A device that stores energy and makes it available in an electrical form.
A. 
This article applies to all solar energy systems permitted, installed, or modified in the City after the effective date of this article, excluding standard maintenance and repair.
B. 
Modifications to an existing solar energy system that increase the solar energy system area by more than 5% of the original area of the solar energy system (exclusive of moving any fencing) shall be subject to this article.
C. 
All solar energy systems shall be designed, erected, and installed in accordance with all applicable codes, regulations, and industry standards as referenced in the New York State Uniform Fire Prevention and Building Code (Building Code), the New York State Energy Conservation Code (Energy Code), and the City Code.
A building permit shall be required for installation of all solar energy systems and the construction/installation shall be carried out in conformance with such building permits.
All Tier 1 solar energy systems are permitted in all zoning districts and shall be exempt from site plan review, subject to the following conditions for each type of solar energy system:
A. 
Roof-mounted solar energy systems.
(1) 
Roof-mounted solar energy systems shall incorporate, when feasible, the following design requirements:
(a) 
Solar panels on pitched roofs shall be mounted with a maximum distance of eight inches between the roof surface and the highest edge of the system.
(b) 
Solar panels on pitched roofs shall be installed parallel to the roof surface on which they are mounted or attached.
(c) 
Solar panels on pitched roofs shall not extend higher than the highest point of the roof surface on which they are mounted or attached.
(d) 
Solar panels on flat roofs shall not extend above the top of the surrounding parapet, or more than 24 inches above the flat surface of the roof, whichever is higher.
(2) 
Glare. All roof-mounted solar panels shall have antireflective coating(s).
(3) 
All roof-mounted solar energy systems shall be subject to the maximum height regulations specified for principal and accessory buildings within the underlying zoning district.
B. 
Building-integrated solar energy systems shall be shown on the plans submitted for the building permit application for the building containing the system.
All Tier 2 solar energy systems shall be permitted in all zoning districts as accessory structures and shall be exempt from site plan review under the Zoning Code, subject to the following conditions:
A. 
Glare. All solar panels shall have antireflective coating(s).
B. 
Setbacks. Tier 2 solar energy systems shall be subject to the setback regulations specified for the accessory structures within the underlying zoning district. All ground-mounted solar energy systems shall only be installed in the side or rear yards in residential districts.
C. 
Height. Tier 2 solar energy systems shall be subject to the height limitations specified for accessory structures within the underlying zoning district.
D. 
Screening and visibility.
(1) 
All Tier 2 solar energy systems shall have views minimized from adjacent properties to the extent reasonably practicable.
(2) 
Solar energy equipment shall be located in a manner to reasonably avoid and/or minimize blockage of views from surrounding properties and shading of property to the north, while still providing adequate solar access.
E. 
Lot size. Tier 2 solar energy systems shall comply with the existing lot size requirement specified for accessory structures within the underlying zoning district.
All Tier 3 solar energy systems are permitted through the issuance of a special use permit pursuant to § 179-24 of this chapter within the Industrial (I-1), Light Industrial (I-2) and General Commercial (C-1) zoning districts, and are subject to site plan application requirements set forth in Article VI of this chapter.
A. 
Applications. Applications for the installation of Tier 3 solar energy system shall be reviewed by the Building and Zoning Administrator for completeness. Applicants shall be advised of the completeness of their application or any deficiencies that must be addressed prior to substantive review.
B. 
Underground requirements. All on-site utility lines shall be placed underground to the extent feasible and as permitted by the serving utility, with the exception of the main service connection at the utility company right-of-way and any new interconnection equipment, including without limitation any poles, with new easements and rights-of-way.
C. 
Vehicular paths. Vehicular paths within the site shall be designed to minimize the extent of impervious materials and soil compaction.
D. 
Signage.
(1) 
No signage or graphic content shall be displayed on the solar energy systems except the manufacturer's name, equipment specification information, safety information, and twenty-four-hour emergency contact information. Said information shall be depicted within an area no more than eight square feet.
(2) 
As required by the National Electric Code (NEC), disconnect and other emergency shutoff information shall be clearly displayed on a light reflective surface. A clearly visible warning sign concerning voltage shall be placed at the base of all pad-mounted transformers and substations.
E. 
Glare. All solar panels shall have antireflective coating(s).
F. 
Lighting. Lighting of the solar energy systems shall be limited to that minimally required for safety and operational purposes and shall be reasonably shielded and downcast from abutting properties.
G. 
Tree cutting. Removal of existing trees larger than six inches in diameter should be minimized to the extent possible.
H. 
Decommissioning.
(1) 
Solar energy systems that have been abandoned and/or not producing electricity for a period of one year shall be removed at the owner and/or operator's expense, which may come from any security made with the City as set forth herein.
(2) 
A decommissioning plan signed by the owner and/or operator of the solar energy system shall be submitted by the applicant, addressing the following:
(a) 
The cost of removing the solar energy system.
(b) 
The time required to decommission and remove the solar energy system and any ancillary structures.
(c) 
The time required to repair any damage caused to the property by the installation and removal of the solar energy system.
(3) 
Security.
(a) 
The deposit, executions, or filing with the City Clerk of cash, bond, or other form of security reasonably acceptable to the City shall be in an amount sufficient to ensure the good-faith performance of the terms and conditions of the permit issued pursuant hereto and to provide for the removal and restoration of the site subsequent to removal. The amount of the bond or security shall be 125% of the cost of removal of the Tier 3 solar energy system and restoration of the property with an escalator of 2% annually for the life of the solar energy system.
(b) 
In the event of default upon performance of such conditions, after proper notice and expiration of any cure periods, the cash deposit, bond, or security shall be forfeited to the City, which shall be entitled to maintain an action thereon. The cash deposit, bond, or security shall remain in full force and effect until restoration of the property as set forth in the decommissioning plan is completed.
(c) 
In the event of default or abandonment of the solar energy system, the system shall be decommissioned as set forth in § 179-99 herein.
I. 
Site plan application. For any solar energy system requiring a special use permit, site plan approval shall also be required. Any site plan application shall include, in addition to any information required by Article VI hereof, the following information:
(1) 
Property lines and physical features, including roads, for the project site.
(2) 
Proposed changes to the landscape of the site, grading, vegetation clearing and planting, exterior lighting, and screening vegetation or structures.
(3) 
A one- or three-line electrical diagram detailing the solar energy system layout, solar collector installation, associated components, and electrical interconnection methods, with all National Electrical Code compliant disconnects and over current devices.
(4) 
A preliminary equipment specification sheet that documents all proposed solar panels, significant components, mounting systems, and inverters that are to be installed. A final equipment specification sheet shall be submitted prior to the issuance of building permit.
(5) 
Name, address, and contact information of proposed or potential system installer and the owner and/or operator of the solar energy system. Such information of the final system installer shall be submitted prior to the issuance of a building permit.
(6) 
Name, address, phone number, and signature of the project applicant, as well as all the property owners, demonstrating their consent to the application and the use of the property for the solar energy system.
(7) 
Zoning district designation for the parcel(s) of land comprising the project site.
(8) 
Property operation and maintenance plan. Such plan shall describe continuing photovoltaic maintenance and property upkeep, such as mowing and trimming.
(9) 
Erosion and sediment control and stormwater management plans prepared to New York State Department of Environmental Conservation standards, if applicable, and to such standards as may be established by the Planning Commission.
(10) 
Prior to the issuance of the building permit or final approval by the Planning Commission, but not required as part of the application, engineering documents must be signed and sealed by a New York State licensed professional engineer or registered architect.
J. 
Special use permit standards. In addition to the requirements of § 179-24 hereof, the following shall apply:
(1) 
Lot size. The property on which a Tier 3 solar energy system is placed shall meet the lot size requirements of the underlying zoning district.
(2) 
Setbacks. Tier 3 solar energy systems shall comply with the setback requirements of the underlying zoning district for principal structures.
(3) 
Height. Tier 3 solar energy systems shall comply with the building height limitations for principal structures of the underlying zoning district.
(4) 
Lot coverage.
(a) 
The following components of a Tier 3 solar energy system shall be included in the calculations for lot coverage requirements:
[1] 
Foundation systems, typically consisting of driven piles or monopoles or helical screws with or without small concrete collars.
[2] 
All mechanical equipment of the solar energy system, including any pad-mounted structure for batteries, switchboard, transformers, or storage cells.
[3] 
Paved access roads servicing the solar energy system.
(b) 
Lot coverage of the solar energy system, as defined above, shall not exceed the maximum lot coverage requirement of the underlying zoning district.
(5) 
Fencing requirements. All mechanical equipment, including any structure for storage batteries, shall be enclosed by a seven-foot-high fence, as required by NEC, with a self-locking gate to prevent unauthorized access.
(6) 
Screening and visibility.
(a) 
Solar energy systems smaller than 10 acres shall have views minimized from adjacent properties to the extent reasonably practicable using architectural features, earth berms, landscaping, or other screening methods that will harmonize with the character of the property and surrounding area.
(b) 
Solar energy systems larger than 10 acres shall be required to:
[1] 
Conduct a visual assessment of the visual impacts of the solar energy system on public roadways and adjacent properties. At a minimum, a line-of-sight profile analysis shall be provided. Depending upon the scope and potential significance of the visual impacts, additional impact analyses, including for example a digital viewshed report, may be required to submitted by the applicant.
[2] 
Screening and landscaping.
[a] 
Submit a screening and landscaping plan to show adequate measures to screen through landscaping, grading, or other means so that views of solar panels and solar energy equipment shall be minimized as reasonably practical from public roadways and adjacent properties to the extent feasible.
[b] 
The screening and landscaping plan shall specify the locations, elevations, height, plant species, and/or materials that will comprise the structures, landscaping, and/or grading used to screen and/or mitigate any adverse aesthetic effects of the system. The landscaped screening shall be comprised of a minimum of one evergreen tree, at least six feet high at time of planning, plus two supplemental shrubs at the reasonable discretion of the Planning Commission, all planted within each 10 linear feet of the solar energy system. Existing vegetation may be used to satisfy all or a portion of the required landscaped screening. A list of suitable evergreen tree and shrub species should be provided by the City upon request.
(7) 
Agricultural resources. For projects located on agricultural lands:
(a) 
Any Tier 3 solar energy system located on areas that consist of prime farmland or farmland of statewide importance shall not exceed 50% of the area of prime farmland or farmland of statewide importance on the parcel.
(b) 
Tier 3 solar energy systems on prime farmland or farmland of statewide importance shall be required to seed 20%.
(c) 
To the maximum extent practicable, Tier 3 solar energy systems located on prime farmland shall be constructed in accordance with the construction requirements of the New York State Department of Agriculture and Markets.
(d) 
Tier 3 solar energy system owners shall develop, implement, and maintain native vegetation to the extent practicable pursuant to a vegetation management plan by providing native perennial vegetation and foraging habitat beneficial to game birds, songbirds, and pollinators. To the extent practicable, when establishing perennial vegetation and beneficial foraging habitat, the owners shall use native plant species and seed mixes.
K. 
Ownership changes. If the owner or operator of the solar energy system changes or the owner of the property changes, the special use permit shall remain in effect, provided that the successor owner or operator assumes in writing all of the obligations of the special use permit, site plan approval, and decommissioning plan, including financial assurance therefor. A new owner or operator of the solar energy system shall notify the Building and Zoning Administrator of such change in ownership or operator within 30 days of the ownership change.
A. 
Solar energy systems and solar energy equipment shall be certified under the applicable electrical and/or building codes as required.
B. 
Solar energy systems shall be maintained in good working order and in accordance with industry standards. Site access shall be maintained, including snow removal at a level acceptable to the local fire department and, if the Tier 3 solar energy system is located in an ambulance district, the local ambulance corps.
C. 
If storage batteries are included as part of the solar energy system, they shall meet the requirements of any applicable fire prevention and building code when in use and, when no longer used, shall be disposed of in accordance with the laws and regulations of the City and any applicable federal, state, or county laws or regulations.
A. 
The special use permit and site plan approval for a solar energy system shall be valid for the period(s) set forth in § 179-24 and Article VI of this chapter, respectively.
B. 
Upon cessation of electricity generation of a solar energy system on a continuous basis for 12 months, the City may notify and instruct the owner and/or operator of the solar energy system to implement the decommissioning plan. The decommissioning plan must be completed within 360 days of notification.
C. 
If the owner and/or operator fails to comply with decommissioning upon any abandonment, the City may, at its discretion, utilize the bond and/or security for the removal of the solar energy system and restoration of the site in accordance with the decommissioning plan.
Any violation of this article shall be subject to the enforcement requirements, including civil and criminal penalties, provided for in the City's Zoning Code.
The invalidity or unenforceability of any section, subsection, paragraph, sentence, clause, provision, or phrase of the aforementioned sections, as declared by any court of competent jurisdiction, shall not affect the validity or enforceability of any other section, subsection, paragraph, sentence, clause, provision, or phrase, which shall remain in full force and effect.