A.
Purpose and intent. The purpose and intent of this section is to
establish standards for refuse collection areas.
B.
Applicability. All nonresidential and multifamily development shall
provide appropriate refuse collection areas and facilities in accordance
with the standards and requirements of this § 72-57.
A.
Location Refuse collection facilities shall:
(1)
Be located so as to facilitate collection and minimize any negative
impact on on-site operations, neighboring lands, or public rights-of-way
(see Figure 72-57.1, Refuse Location);
(2)
Not be located between a principal structure and any adjacent
streets; and
(3)
Be located at least 20 feet from any lot line shared with a
lot containing a single-family detached dwelling; and
(4)
Not be located closer than three feet from any adjacent lot
line.
|
Figure 72-57.1. Refuse Collection Area Location
 |
B.
Configuration Refuse collection facilities shall be:
(1)
A minimum size necessary to accommodate both solid waste containers
and recycling containers.
(2)
Located atop a concrete pad with a minimum depth of six inches.
(4)
Contained within an enclosure; and
(5)
Constructed according to specifications established by the solid
waste services provider to allow for collection without damage to
the collection vehicle.
