Any builder, developer, contractor or other
person, firm or corporation that desires to connect his/her sewer
system to the present sewer distribution system, or any addition or
extension thereof, of the Borough may be permitted to do so upon the
following terms and conditions:
A. All mains, connections, manholes and other appurtenances
shall be installed at the cost and expense of such person making the
installation.
B. Locations, grades and specifications will be furnished
by the Engineer and must be approved by him/her prior to use.
C. Upon the completion of such installation and connection,
all mains, connections, manholes and appurtenances shall become the
sole and exclusive property of the Borough.
[Amended 11-9-2005 by Ord. No. 05-25R; 6-4-2018 by Ord. No. 18-06R; 12-16-2019 by Ord. No. 19-17-R]
Any person desiring to connect to the sewer
system of the Borough for the purpose of using sewer service shall
first pay to the Borough the sum of $1,500 for each unit located in
the building which is to be connected. For example, a single-family
house connection shall be $1,500. A multifamily dwelling shall be
$1,500 times the total number of units in the building or buildings
making up the property. In the case of nonresidential connections,
the person desiring to connect shall pay $1,500 for each 2,500 square
feet, or fraction thereof, of the building or buildings in question.
Such connection charge shall apply in all instances, including connections
made by a developer or builder who installs the sewer mains as provided
elsewhere in the Fanwood Borough Code.