The purpose of this article is for promoting compatible development
and stability of property values, protecting the attractiveness and
functional utility of the community as a place to live and work, preserving
the character and quality of the built environment by retaining the
integrity of those areas which have a discernible character or are
of special historic significance, protecting certain public investments
in the area, and raising the level of community expectations for the
quality of its environment. This article requires site plan and architectural
review of proposed development. Applicable fees shall apply as per
the fee schedule.
The Planning and Zoning Commission shall review commercial and industrial site plans and conditional use applications, as well as all other applications set forth in §
590-108A. The review will include existing and proposed structures, neighboring uses, utilization of landscaping and open space, parking areas, driveway locations, loading and unloading (in the case of commercial and industrial uses), highway access, traffic generation and circulation, drainage, sewerage and water systems, and the proposed operation. The Planning and Zoning Commission may approve said site plans only after considering the following:
A. The proposed use(s) conform(s) to the uses permitted in that zoning
district.
B. The dimensional arrangement of buildings and structures conforms
to the required area, yard, setback, and height restrictions of this
chapter.
C. The proposed use conforms to all use and design provisions and requirements
(if any) as found in this chapter for the specified uses.
D. There is a proper relationship between the existing and proposed
streets and highways within the vicinity of the project in order to
assure the safety and convenience of pedestrian and vehicular traffic.
E. The proposed on-site buildings, structures, and entryways are situated
and designed to minimize adverse effects upon owners and occupants
of adjacent and surrounding properties by providing for adequate design
of ingress/egress, interior/exterior traffic flow, stormwater drainage,
erosion, grading, lighting, and parking, as specified by this chapter
or any other codes or laws.
F. Natural features of the landscape are retained where they can enhance
the development on the site, or where they furnish a barrier or buffer
between the project and adjoining properties used for dissimilar purposes,
or where they assist in preserving the general safety, health, welfare,
and appearance of the neighborhood.
G. Adverse effects of the proposed development and activities upon adjoining
residents or owners are minimized by appropriate screening, fencing,
or landscaping, as provided or required in this chapter.
H. Land, buildings, and structures are readily accessible to emergency
vehicles and disabled persons.
I. The site plan is consistent with the intent and purpose of this chapter,
which are to promote the public health, safety, and general welfare,
to encourage the use of lands in accordance with their character and
adaptability, to avoid the overcrowding of population, to lessen congestion
on the public roads and streets, to reduce hazards to life and property,
and to facilitate existing community development plans.
J. The site plan is consistent with the public goals, objectives, principles,
standards, policies, and urban design criteria set forth in the Village's
Master Plan or components thereof.
The following architectural review principles, criteria, and
review guidelines are established for commercial, industrial and multifamily
sites:
A. Building scale and mass. The relative proportion of a building to
its neighboring buildings shall be maintained or enhanced when new
buildings are built or when existing buildings are remodeled or altered.
B. Building rooflines and roof shapes. Pitched roofs such as hip, gable,
etc., shall be utilized when appropriate. The visual continuity of
roofs and their contributing elements (parapet walls, coping, cornices,
etc.) shall be maintained in building development or redevelopment.
Shingles shall be made of cedar, asphalt or metal.
[Amended 7-27-2020]
C. Materials.
[Amended 8-16-2010]
(1)
Material selection for architectural design shall be based upon
the prevailing material already used on existing buildings in the
area. No building shall be permitted where any exposed facade is constructed
or faced with a finished material which is aesthetically incompatible
with other commercial, industrial, and multifamily (R-5 and R-6) building
facades in the area and which presents an unattractive appearance
to the public and surrounding properties.
(2)
Metal buildings shall be limited to the commercial and industrial
districts. All approved metal buildings shall have front facades constructed
of nonmetal materials (masonry, wood, etc.). The remaining facades
must have a minimum four-foot-high side wall of nonmetal materials.
(3)
Exterior insulating finishing systems (EFIS) (i.e., "Dryvit,"
"Sto," "cement board," etc.) are permitted as an accent material only
and will not be permitted as the predominant exterior material on
any facade without the approval of the Planning and Zoning Commission.
The use of EIFS as an accent material should incorporate the use of
color, detail, pattern, and texture to take advantage of the design
flexibility it affords. EIFS can be used on canopies, spandrels, fascias,
soffits, accent bands and trim.
(4)
In the I-1 and I-2 zoning classifications, the sides and rear
of all industrial buildings shall be finished in an attractive manner
in keeping with the accepted standards used for industrial buildings,
subject to the approval of the Planning and Zoning Commission. Buildings
must be of approved construction in conformity with all applicable
building codes.
(5)
Unfaced concrete block and structural concrete may be permitted
in I-1 and I-2 Zoning Districts upon approval of the Planning and
Zoning Commission. Pole buildings shall not be permitted as a principal
structure in any way.
(6)
Exterior wall coverage may, upon approval from the Planning and Zoning Commission and the Village Board, be exempt from Subsection
C(2) when the building placement is obscured from view from all sides due to existing buildings on the site consistent with compatible uses, or a one-hundred-percent landscape screen at a minimum height of six feet thereby obstructing the lines of sight of the building, or when the structure is located in an interior lot away from intersecting public streets and lines of sight consistent with compatible uses.
D. Colors. Since the selection of building colors has a significant
aesthetic and visual impact upon the public and neighboring properties,
color shall be selected in general harmony with the existing neighborhood
buildings, subject to approval of the Planning and Zoning Commission.
Colors shall be nonfluorescent. Earth tones such as grays, browns,
greens, burgundies, and tans are required. However, all proposed color
schemes shall be reviewed on their individual merit based upon building
design, building materials, longevity of the color choice(s) (fad/nonfad),
statement in relation to overall theme, character and color of adjacent
structures, and unity with existing structures on the project site.
E. Building location. No building shall be permitted to be sited in
a manner which would unnecessarily destroy or substantially damage
the beauty of the area, particularly insofar as it would adversely
affect values incident to ownership of land in the area, or which
would unnecessarily have an adverse effect on the beauty and general
enjoyment of existing structures on adjoining properties.
The following is a description of the plans, documents, and
written submittals required for the various permits by this chapter.
Applications shall be submitted on forms provided by the Village Clerk,
along with applicable fees as per the fee schedule. All plans and
documents must be reproducible by photocopier, except required scaled
drawing.
A. Written use description. A description of the intended uses, described
in reasonable detail, may include the following:
(1)
Zoning. Existing zoning district(s) [and proposed zoning district(s)
if different].
(2)
Land use plan designation. The designated type of use shown
for the site on the Village Land Use Map.
(3)
Current land uses present on the subject property.
(4)
Proposed land uses for the subject property.
(5)
Projected use. Projected number of residents, employees, and
daily visitors.
(6)
Proposed development. The amount of dwelling units, floor area,
impervious surface area, and landscape surface area, and resulting
site density floor area ratio, impervious surface area ratio, and
landscape surface area ratio.
(7)
Operations. The operational considerations relating to hours
of operation, projected normal and peak water usage, sanitary sewer
or septic loading, and traffic generation.
(8)
Operational considerations. Relating to potential nuisance creation pertaining to noncompliance with the performance standards addressed in Article
III, including street access, landscaping, traffic visibility, parking, loading, exterior storage, exterior lighting, vibration, noise, air pollution, odor, electromagnetic radiation, glare and heat, fire and explosion, toxic or noxious materials, waste materials, drainage, and hazardous materials. If no such nuisances will be created (as indicated by complete and continuous compliance with the provisions of Article
III), then the statement "The proposed development shall comply with all requirements of Article III" shall be provided.
(9)
Building material. The exterior building and fencing material
types and colors.
(10)
Expansion. Any possible future expansion and related implications.
(11)
Other information. Any other information pertinent to adequate
understanding by the Planning and Zoning Commission of the intended
use and its relation to nearby properties.
B. Small location map. A map of the subject property showing all lands
for which the use is proposed and all other lands within 200 feet
of the boundaries of the subject property. The location map shall
clearly indicate the current zoning of the subject property and adjacent
properties and show any other jurisdiction(s) that maintains control
over the property. The location map shall be at a scale that is not
less than one inch equals 800 feet, as well as a location map copy
on a sheet no larger than 11 inches by 17 inches, showing the subject
property and illustrating its relationship to the nearest street intersection.
C. Conceptual or sketch plan. A sketch plan or concept plan can be a
freehand diagram over the property map showing a rough sketch of the
general proposed development pattern for the site. Major features
should be labeled.
D. Scale site plan. A site plan of the subject property as proposed
for development. A site plan shall be submitted at scale (and a reduction
at 11 inches by 17 inches) that includes:
(1)
A title block which indicates the name, address and phone/fax
number(s) of the current property owner and/or agent(s) (developer,
architect, engineer or planner) for project.
(2)
The date of the original plan and the latest date of revision
to the plan.
(3)
A North arrow and a graphic scale. Said scale shall not be smaller
than one inch equals 100 feet.
(4)
A legal description of the subject property.
(5)
All property lines and existing and proposed right-of-way lines
with bearings and dimensions clearly labeled.
(6)
All existing and proposed easement lines and dimensions with
a key provided and explained on the margins of the plan as to ownership
and purpose.
(7)
All required building setback lines.
(8)
All existing and proposed buildings, structures, and paved areas,
including building entrances, walks, drives, decks, patios, fences,
utility poles, drainage facilities, and walls.
(9)
The location and dimensions of all access points onto public
streets.
(10)
The location and dimensions of all on-site parking (and off-site
parking provisions if they are to be employed), including a summary
of the number and size of parking stalls provided versus the number
required by this chapter.
(11)
The location and dimensions of all loading and service areas
on the subject property and labels indicating the dimensions of such
areas.
(12)
The location of all outdoor storage areas and screening devices.
(13)
The location, type, height, size and lighting of all signage
on the subject property.
(14)
The location, height, design/type, illumination power and orientation
of exterior lighting on the subject property.
(15)
The location and type of any permanently protected green space
areas.
(16)
The location of existing and proposed drainage facilities.
(17)
In the legend, data for the subject property:
(e)
Impervious surface ratio.
E. Detailed landscape plan. A detailed landscape plan, at the same scale as the site plan (and a reduction at 11 inches by 17 inches), showing the location of all required buffer yards and landscaped areas and existing and proposed landscape point fencing and berm options for meeting said requirements. The landscaping plan shall demonstrate complete compliance with the requirements of Article
VI.
(1)
The individual plant locations, species, and size shall be shown.
(2)
Screening such as fencing types and berm heights shall be shown
by size and height.
F. Grading plan. A grading plan, at the same scale as the site plan
(and a reduction at 11 inches by 17 inches), showing existing and
proposed grades, including retaining walls and related devices, and
erosion control measures. It will include:
(1)
Existing and proposed contours at a minimum of two-foot contours.
(2)
Existing and proposed spot elevations at corners of structures
and significant changes in grade.
(3)
Flow lines of all drainages.
G. Elevation drawings. Side views of proposed buildings, structures,
or proposed remodeling of existing buildings showing finished exterior
treatment shall also be submitted, with adequate labels provided to
clearly depict exterior materials, texture, color and overall appearance.
Perspective renderings of the proposed project and/or photos of similar
structures may be submitted, but not in lieu of an adequate drawing
showing the actual intended appearance of the buildings.
H. Erosion control plan. An erosion control plan, at the same scale as the site plan (and a reduction at 11 inches by 17 inches), showing all erosion control measures, as required by Article
IV:
(1)
Location and description of soil types which have been rated
severe for erosion limitations by the U.S. Soil Conservation Service.
(2)
Elevation and extent of all proposed grading.
(3)
Plans and specifications for erosion control devices, such as
retaining walls, cribbing, planting, anti-erosion devices, and other
temporary or permanent protective measures.
(4)
Drainage areas of the site, upstream culverts or other restrictions.
(5)
Plans (written or drawn) for removal, recontouring, or other
disposition of sediment basins or other temporary devices.
(6)
Plans prepared as per the Wisconsin Construction Site Best Management
Practices Handbook, prepared by the Wisconsin Department of Natural
Resources.