[Added 5-18-2017 by Ord. No. O-17-01]
The tract of land proposed for a community corrections facility must meet the following minimum requirements:
A. 
It shall be located in the Rural Residential Zoning District;
B. 
It must have direct access to either a primary or secondary arterial as designated in § 177-34A; and
C. 
No portion of the proposed structure including any of its accessory structures/uses shall be located closer than 1,000 feet to an existing residential use, place of assembly, park, or similar recreation space, primary or secondary school, child or adult day-care center. This distance shall be measured from the structure to the property line of the nearest aforementioned use(s).
The minimum lot size and width, minimum yard setbacks, maximum lot coverage, and maximum height for a community corrections facility shall be as follows.
A. 
Minimum lot size: five acres.
B. 
Minimum lot width: 300 feet.
C. 
Minimum setbacks: 100 feet from front, side, and rear lot lines.
D. 
Maximum lot coverage: 30% for all impervious surfaces.
E. 
Maximum building height: 35 feet.
A. 
The community corrections facility shall be certified and meet all required regulations of the appropriate local, state, and/or federal agency(ies).
B. 
Supervision shall be provided in accordance with the regulations of the certifying agency(ies) and shall include at a minimum one responsible nonclient adult available on the premises on a twenty-four-hour-a-day basis while any of the clients are on premises.
C. 
The community corrections facility shall provide residency for no more than 40 residents at any given time.
D. 
One parking space per 500 square feet of gross floor area of administrative and service areas plus one parking space per eight beds. Additional spaces may be required by College Township as condition of approval dependent upon specific needs of the operation.