[Amended at time of adoption of Code (see Ch. 1, General
Provisions, Art. II)]
The plat shall be drawn by a licensed New Jersey land surveyor
and shall be based on Tax Map information or some other similarly
accurate base, at a scale of not less than 40 feet to the inch. It
shall comply with N.J.S.A. 46:26B-1 et seq., and shall show or include
the following information:
A. The name of the land surveyor who has drawn the sketch plat.
B. The location of that portion which is to be subdivided in relation
to the entire tract.
C. All existing structures and wooded areas within the portion to be
subdivided and within 200 feet thereof.
D. The name of the owner and of all adjoining property owners, as disclosed
by the most recent Borough tax records.
E. The Tax Map sheet, block and lot numbers and a key map.
F. All streets or roads and streams within 500 feet of the subdivision,
including the extent of paving of all such streets.
G. The proposed lot layout, lot dimensions and total area of each lot.
H. Proposed use of the requested subdivision.
I. Location of any proposed building or buildings.
J. Any other pertinent information deemed necessary by the Planning
Board in the consideration of the proposed subdivision.
K. All existing storm and sanitary sewers within 200 feet of the subdivision,
with all invert and surface elevations included.
L. Sufficient elevations and contours at two-foot intervals to determine
the general slope and natural drainage of land and high and low points
if required by the Borough Engineer.
M. Any portion of the site within a flood hazard area and proposed treatment of such portion under the requirements of Chapter
98, Flood Damage Prevention.
[Amended at time of adoption of Code (see Ch. 1, General
Provisions, Art. II)]
The final plat shall be drawn in ink on Mylar by a New Jersey
licensed land surveyor at a scale of not less than one inch equals
40 feet and in compliance with N.J.S.A. 46:26B-1 et seq., and in accordance
with the terms of this Part 2. The final plat shall show or be accompanied
by the following:
A. Date, name and location of the subdivision, name of owner, graphic
scale and reference meridian and a key map.
B. Tract boundary lines, right-of-way lines of streets, street names,
easements and other rights-of-way, land to be reserved or dedicated
to public use, all lot lines and other site lines, all with accurate
dimensions, bearings or deflection angles, and radii, arcs and central
angles of all curves and all other information required by the State
of New Jersey Map Filing Law, N.J.S.A. 46:26B-1 et seq.
C. The purpose of any easement or land reserved or dedicated to public
use shall be designated, and the proposed use of sites other than
residential shall be noted.
D. Each block shall be numbered, and the lots within each block shall
be numbered consecutively and shall coincide with the Tax Atlas in
accordance with the instructions of the Borough Engineer.
E. Minimum building setback lines on all lots and other sites.
F. Location and description of all monuments, as required by the Borough
Engineer and Planning Board.
G. Names of owners of adjoining properties and those located across
any existing or proposed street.
H. Certification by a licensed engineer or surveyor as to accuracy of
details of plat.
I. Certification that the developer is the owner or agent of the owner
of the land or that the owner has given consent under an option agreement.
J. When approval of a plat is required by any officer or body of the
Borough, county or state, such approval shall be certified on the
plat.
K. Certificate from the Tax Collector that all taxes are paid to date.
L. All work shall be done in accordance with the requirements of the
Borough Engineer.